User Manual

MDE-4199 Contactless Smart Card Retrofit Kit M05205K00X Installation Manual • January 2005 Page 21
Installation
5 Reconnect the power/data cable to the seven-pin connector (Figure 12) on the Printed Circuit
Card (PCA) located on the left side of the dual head card assembly.
6 Insert the connector end of the ESD Ground Cable M02134A001 (Figure 4) to the two-pin
connector on the card reader PCA (Figure 12).
7 Attach the ring end of ESD Ground Cable M02134A001 (Figure 13) to the option door chassis
using the screw removed in Step 10 of “Removing the Card Reader from the Advantage Series
Unit”.
Figure 13: Advantage ESD Card Reader Ground Cable M02134A001
Refer to Figure 12 and ensure that the M02134A001 ESD Ground Cable is inserted into the
correct connector on the dual head card assembly. Failure to connect the cable properly will
damage the card reader.
CAUTION
Ring End
Connector End