User Manual

Installation
Page 22 MDE-4199 Contactless Smart Card Retrofit Kit M05205K00X Installation Manual • January 2005
Figure 14: Advantage ESD Card Reader Ground Cable M02134A001
8
Ensure that the Ground Cable is secured to the unit with sufficient slack to prevent cable pulls
and pinching. Use Q13558-04 Cable Mounts as required.
Note: Installation of the PCA antenna will require positioning the antenna as shown in Figure
15. Using cloth and isopropyl alcohol, remove any dust or dirt from the antenna
location prior to removing the adhesive backing from the PCA antenna.
9 Obtain the M0517A001 Antenna PCA from the kit and remove the adhesive backing.
Carefully position the antenna under the card reader as shown on Figure 15 and press firmly
into place.
10 Using two Q11657-290 screws (part of the kit), secure the antenna in place by inserting the
screws in the mounting holes (Figure 15) and turning the self-tapping screws into the option
door.
M02134A001
Cable