User Manual

Installation
Page 30 MDE-4199 Contactless Smart Card Retrofit Kit M05205K00X Installation Manual January 2005
Figure 22: Advantage ESD Card Reader Ground Cable M02134A001
8
Ensure that the Ground Cable is secured to the unit with sufficient slack to prevent cable pulls
and pinching. Use Q13558-04 Cable Mounts as required.
Note: Installation of the PCA antenna will require positioning the antenna as shown in Figure
23. Using cloth and isopropyl alcohol, remove any dust or dirt from the antenna
location prior to removing the adhesive backing from the PCA antenna.
9 Open the right side options door.
10 Refer to Figure 23 and mark the proposed position of the antenna on the back of the right hand
options door.
11 Obtain the M0517A001 dual head card assembly antenna from the kit and remove the
adhesive backing. Carefully position the antenna in the position marked in previous step (and
shown in Figure 23) and press firmly into place.
12 Using two Q11657-290 screws (part of the kit), secure the antenna in place by inserting the
screws in the mounting holes (Figure 23) and turning the self-tapping screws into the option
door.
Ring End
Connector End