User Manual

Introduction
P
re
l
im
i
na
ry
Page 2 MDE-4939 FlexPay™ Contactless Module Installation and Service Manual · May 2011
Table of Contents
Topic Page
Introduction 1
Important Safety Information 5
Mounting the FlexPay Contactless Module on Encore S Enhanced Dispenser Equipped with SPOT EMV CRIND 7
Mounting the FlexPay Contactless Module on The Advantage Series Dispensers 10
Mounting the FlexPay Contactless Module on Encore 300 and Encore 500 Dispensers 11
Mounting the Contactless OTI Module on Encore 300 (Pre-EMV) Dispensers 12
Mounting the FlexPay Contactless Module on Encore 500 S Dispensers 12
Mounting the FlexPay Contactless Module on Eclipse Dispensers 13
Mounting the FlexPay Contactless Module on FlexPay OPT Dispensers 13
Installing the Contactless Interface Board on SCR 2 14
Configuring SPOT EMV CRIND for FlexPay Contactless Module 19
Verifying Functionality of FlexPay Contactless Module Through CRIND Diagnostics (Generic CRIND) 22
Affixing FlexPay Contactless FCC Label 25
Required Tools
The following tools are required for installation of the Contactless Interface Board:
• Phillips
®
Screwdriver
• Small Channel Locks or Pliers
• 1/4-inch Nut Driver or Socket
Parts List
Encore
®
S Enhanced Dispensers - M12027K001
The following table lists the parts included in the M12027K001 kit:
Item Description Part Number Quantity
1 Contactless Antenna Assembly M11697A001 1
2 Contactless Antenna Spacer M12032B001 1
3 Thread Forming Screw Q11677-24 4
4 Nylon Washer M12184B001 4
5 TRIND
®
E-CIM Lens M07698B001 1
6 Gasket TRIND Lens M07715B002 1
7 Thread Forming Screw M00419B311 4
8 Cable <<Please provide the
required part number.>>
1
9 Graphic <<Please provide the
required part number.>>
1
The Advantage
®
Series Dispensers - M12024K001
The following table lists the parts included in the M12024K001 kit:
Item Description Part Number Quantity
1 Contactless Antenna Assembly M11697A001 1
2 Contactless Antenna Bracket M11800B001 1
3 Contactless Antenna Spacer M12032B001 1