User Manual
Table Of Contents
- Introduction
- Parts Lists
- Important Safety Information
- Preliminary Precautions
- Safety Symbols and Warning Words
- Prevent Explosions and Fires
- Prevent Electrical Shock and Sparks
- Hydraulic Pressure Releases and Fuel Leakage
- Protect Your Eyes
- React Quickly to Fuel Spills, Fires or Vehicle Impact
- Emergency and First Aid Information
- Warning Labels
- Working Alone
- Contacting Emergency Personnel
- Informing Emergency Personnel
- Other Useful Safety Information
- Classifying Hazardous Locations
- ASC TRIND Technology Update
- Installation Instructions For The Advantage Series Units
- Important Preinstallation Instruction.
- Removing Mobil Logo Display Cabinet
- Preparing For Installation
- Modifying Right Options Door
- Reinstalling Button
- Reinstalling Door Alarm Switches
- Installing Right Options Door
- Installing Bulkhead Grommet
- Installing Card Cage Assembly
- Installing Transmitter Cables
- Routing R20773-G2 Cables
- T20662-G2 Cable Routing In Main Cabinet
- Installation Instructions For MPD-3 Units
- Preparing Antenna Cable Connections
- CRIND® BIOS TRIND™ TIRIS Upgrade
- Dispenser Set-Up
Installation Instructions For The Advantage Series Units
Page 36 MDE-4063 TRIND TIRIS Retrofit Kit C00011-010-XXXX Installation Manual
• August 2001
P
r
e
liminary
08-2
4
-01
5 Ensure that option door opens and closes freely without stressing or crimping cables, use tie
wrap Q10178-01 to loosely secure cables to small fixed tab at end of light frame, forcing
cables between light frame and door gasket.
6 Secure J1/J2 end of each R20773-G2 cable to existing cable clamp (for door cabling) just
inside main cabinet, allowing enough slack for main door to open and close freely without
pulling on or crimping cable. See illustrations below and on next page.
Attach clamps and
cables to underside
of panel light frame
Loosely secure
cables to tab on
light frame with
tie wrap
R20773-G2 Cable routing on
option door
Secure cable
to existing
door cable
clamp