User Manual
Table Of Contents
- Introduction
- Important Safety Information
- Reference Information
- Parts Lists
- Interconnect/Block Diagrams
- Installation
- Commissioning and Warranty Information
Installation
Page 10 MDE-4017A Mat Reader Assembly Kit C00016-XXX Installation • September 2001
Pre
l
iminar
y
09/13/0
1
In Relation to the Interface Box
For optimum Mat Reader performance, the Interface Box should be positioned as close to the
Mat Reader as is conveniently possible. If necessary, the CAT-5 cable, Q13482-06, may be
swapped out for a longer version in order to properly place the Interface Box and still reach the
POS connection. The dash number, such as -06, indicates 6 feet (1.8 meters) long.
In Relation to the Countertop Material
If the countertop material is stainless steel, Formica
®
covered steel, or some other metallic
material, less than desired performance will be experienced. In the preferred setup, the
countertop should be Corian
®
, plastic, wood, or some other non-metallic and/or non-ferrous
material.