User's Manual

Pre
l
imina
ry
Installation of the TCR
Page 8 MDE-4770 Tribrid Card Reader Installation Manual · June 2008
5 From the rear of the main door, position the Card Reader and then the Card Reader bracket on
the door, such that the Card Reader slot (see
Figure 2) is positioned on the top. Loosely secure
the Card Reader bracket and Card Reader to the main door using the two Q11677-26 screws
(provided in the kit) in the top and bottom two holes (looking from the back of the Card
Reader).
Note: While installing the Card Reader bracket onto the Card Reader, the lip on the bottom of
the bracket should face away from you.
Figure 2: TCR Assembly and Encore S EMV Bracket
Encore S TCR Bracket
(M07574B001)
Encore S EMV TCR Assembly (M07999B001) - Front View
Encore S EMV TCR Assembly (M07999B001) - Top View
Printed Circuit
Card (Inside)
Power/Data Connector
Card Reader
Slot
ESD Ground Connection
Antenna
Connector
Figure 3: Encore/Eclipse ESD Ground Cable (M07709A001)
Ring Terminal
Connector
6 Align the Card Reader and bracket. Securely tighten the two mounting screws (Q11677-26).