Manual

ManualsBrandsGilderfluke&Co ManualsVideo16 Bit CD-Quality Digital Audio Systems

- DR-3000 DIGITAL AUDIO REPEATER SYSTEMS -

PRELIMINARY Printed February 27, 1999

rightleft

A B - 3 0 0 0

Sixteen Bit Stereo

Digital Audio Repeater

Function

Select

Adjust

Manual

rightleft

select

DR-3000

Sixteen Bit Stereo

Digital

Audio Repeater

rightleft

select

DR-3000

Sixteen Bit Stereo

Digital

Audio Repeater

rightleft

select

DR-3000

Sixteen Bit Stereo

Digital

Audio Repeater

rightleft

select

DR-3000

Sixteen Bit Stereo

Digital

Audio Repeater

rightleft

select

DR-3000

Sixteen Bit Stereo

Digital

Audio Repeater

rightleft

select

DR-3000

Sixteen Bit Stereo

Digital

Audio Repeater

rightleft

select

DR-3000

Sixteen Bit Stereo

Digital

Audio Repeater

GILDERFLUKE & CO. ¥ 205 SOUTH FLOWER ST. ¥ BURBANK, CALIF. 91502-2102 ¥ 818/840-9484 ¥ FAX818/840-9485

Summary of content (100 pages)

PAGE 1
GILDERFLUKE & CO. ¥ 205 SOUTH FLOWER S T. ¥ BURBANK, CALIF.
PAGE 2
GILDERFLUKE & CO. ¥ 205 SOUTH FLOWER S T. ¥ BURBANK, CALIF.
PAGE 3
GILDERFLUKE & CO. ¥ 205 SOUTH FLOWER S T. ¥ BURBANK, CALIF. 91502-2102 ¥ 818/840-9484 ¥ FAX 818/840-9485 System Overview ........................................................................................... 1 Digital Audio Repeaters ........................................................................................................... 1 Estimated EPROM and PCMCIA Memory Card Capacities ................................................... 3 Digital Audio Bus .......................................
PAGE 4
GILDERFLUKE & CO. ¥ 205 SOUTH FLOWER S T. ¥ BURBANK, CALIF. 91502-2102 ¥ 818/840-9484 ¥ FAX 818/840-9485 Playing a Stereo message ...................................................................................................... 26 Playing a mono spiel through the Left output ......................................................................... 26 Playing a mono spiel through the Right output ....................................................................... 26 Error Messages ................
PAGE 5
GILDERFLUKE & CO. ¥ 205 SOUTH FLOWER S T. ¥ BURBANK, CALIF. 91502-2102 ¥ 818/840-9484 ¥ FAX 818/840-9485 Reload Defaults ..................................................................................................................... 36 eXit Setup Mode .................................................................................................................... 36 Trigger Menu .......................................................................................................................
PAGE 6
GILDERFLUKE & CO. ¥ 205 SOUTH FLOWER S T. ¥ BURBANK, CALIF. 91502-2102 ¥ 818/840-9484 ¥ FAX 818/840-9485 eXit Setup Mode .................................................................................................................... 60 AB/DR-3000 Serial Port Commands ................................................................. 63 Enter Setup Echo Mode ......................................................................................................... 66 Exit Setup Echo Mode ...............
PAGE 7
GILDERFLUKE & CO. ¥ 205 SOUTH FLOWER S T. ¥ BURBANK, CALIF. 91502-2102 ¥ 818/840-9484 ¥ FAX 818/840-9485 Stop at End All: ................................................................................................................ 71 Stop at End Cocked: ....................................................................................................... 71 Stop at End Group: ..........................................................................................................
PAGE 8
GILDERFLUKE & CO. ¥ 205 SOUTH FLOWER S T. ¥ BURBANK, CALIF.
PAGE 9
GILDERFLUKE & CO. ¥ 205 SOUTH FLOWER S T. ¥ BURBANK, CALIF. 91502-2102 ¥ 818/840-9484 ¥ FAX 818/840-9485 - DR-3000 SERIES DIGITAL AUDIO SYSTEM - A SYSTEM OVERVIEW The DR-3000 SERIES DIGITAL AUDIO SYSTEM has been developed to meet all of your needs for Digital Audio Repeaters, Low Level Processing, and Public Address Systems.
PAGE 10
GILDERFLUKE & CO. ¥ 205 SOUTH FLOWER S T. ¥ BURBANK, CALIF. 91502-2102 ¥ 818/840-9484 ¥ FAX 818/840-9485 Each DR-3000 or AB-3000 is a complete stereo audio source. It can be used as two separate monophonic repeaters, or as a single stereo pair. Any number of DR-3000s can be plugged into one or more card cages to provide any number of simultaneous audio tracks. Any number of DR-3000 repeaters can be synchronized within 1/44,100 of a second for use as a multitrack bin loop tape deck replacement.
PAGE 11
GILDERFLUKE & CO. ¥ 205 SOUTH FLOWER S T. ¥ BURBANK, CALIF. 91502-2102 ¥ 818/840-9484 ¥ FAX 818/840-9485 - ESTIMATED EPROM AND PCMCIA MEMORY CARD CAPACITIES4 MBIT (27C040) EPROM (OR EQUIVALENT RAM OR FLASH ROM): 524,288 x 8: 5 KHz Bandwidth 6.
PAGE 12
GILDERFLUKE & CO. ¥ 205 SOUTH FLOWER S T. ¥ BURBANK, CALIF. 91502-2102 ¥ 818/840-9484 ¥ FAX 818/840-9485 32 MBYTE PCMCIA MEMORY CARD: 33,554,432 x 8: Compression: Bytes per second: Each card: Each MCRD-4000: 5 KHz Bandwidth 6.5 KHz Bandwidth 10 KHz Bandwidth 20 KHz Bandwidth (sample rate =11,025) (sample rate =14,700) (sample rate =22,050) (sample rate =44,100) 1 to 1 4 to 1 1 to 1 4 to 1 1 to 1 4 to 1 1 to 1 4 to 1 22,050 5,513 29,400 7,350 44,100 11,025 88,200 22,050 25.4 min. 101.4 min. 19.0 min. 76.
PAGE 13
GILDERFLUKE & CO. ¥ 205 SOUTH FLOWER S T. ¥ BURBANK, CALIF. 91502-2102 ¥ 818/840-9484 ¥ FAX 818/840-9485 pansion card on each AB/DR-3000 at one time. As of this writing, 175 MByte FLASH cards are (or soon will be) available. These potentially give you instant access to up to 701 MBytes of memory. This translates into almost nine hours of CD-quality audio storage on each MCRD-4000 equipped AB/DR-3000. These AB/DR-3000s access their memory in sixteen bit wide words.
PAGE 14
GILDERFLUKE & CO. ¥ 205 SOUTH FLOWER S T. ¥ BURBANK, CALIF. 91502-2102 ¥ 818/840-9484 ¥ FAX 818/840-9485 These are unavailable to the rest of the audio system when the Intelligent Public Address System is used on a DR-3000 installation. The PA System is unavailable if the repeater is using the second Digital Audio Buss bank.
PAGE 15
GILDERFLUKE & CO. ¥ 205 SOUTH FLOWER S T. ¥ BURBANK, CALIF. 91502-2102 ¥ 818/840-9484 ¥ FAX 818/840-9485 the neighbors, the hours of operation can be set for each day of the week. There are eight schedules which are used to select when specific messages are played from the real time clock. The first seven schedules are for each of the seven days of the week. The last ÔweeklyÕ schedule is used for sounds you want to play at the same time seven days a week 10 .
PAGE 16
GILDERFLUKE & CO. ¥ 205 SOUTH FLOWER S T. ¥ BURBANK, CALIF. 91502-2102 ¥ 818/840-9484 ¥ FAX 818/840-9485 front panel. Additionally, all of the analog level settings can have limits placed on them so that a casual user canÕt set a volume at too high or low a level from the front panel.
PAGE 17
GILDERFLUKE & CO. ¥ 205 SOUTH FLOWER S T. ¥ BURBANK, CALIF. 91502-2102 ¥ 818/840-9484 ¥ FAX 818/840-9485 DIGITAL INPUTS: Each AB/DR-3000 has eight optically isolated inputs along with one manual start button on its front panel. The manual start button is generally used for maintenance and testing purposes. The eight optically isolated inputs are Ôswitch closure inputsÕ normally used to trigger the AB/DR-3000.
PAGE 18
GILDERFLUKE & CO. ¥ 205 SOUTH FLOWER S T. ¥ BURBANK, CALIF. 91502-2102 ¥ 818/840-9484 ¥ FAX 818/840-9485 1) Ignore early starts. 2) Jump Forward: Go immediately to the beginning of the next spiel. 3) Store: Ignore the early start for now, but save and do it as soon as the current spiel is done. This can save requests approximately ten deep before overflowing.
PAGE 19
GILDERFLUKE & CO. ¥ 205 SOUTH FLOWER S T. ¥ BURBANK, CALIF. 91502-2102 ¥ 818/840-9484 ¥ FAX 818/840-9485 feature can be turned off for running Gilderfluke & Co. equipment from systems that canÕt generate a checksum. AUDIO OUTPUTS: The normal audio output from the AB/DR-3000 is a balanced +10 dB line level. The output driver is a SSM-2142 transformerless output driver. This chip is compensated for driving standard 600 ohm balanced audio lines.
PAGE 20
GILDERFLUKE & CO. ¥ 205 SOUTH FLOWER S T. ¥ BURBANK, CALIF. 91502-2102 ¥ 818/840-9484 ¥ FAX 818/840-9485 tape for use during programming 16. This is done by using the repeater as both the audio source and SMPTE generator. You can then program the show normally with absolute assurance that the final audio and time code will be perfectly in sync. The SMPTE time code input on each AB/DR-3000 can listen to a SMPTE time code signal and trigger spiels on the left or right side of the repeater.
PAGE 21
GILDERFLUKE & CO. ¥ 205 SOUTH FLOWER S T. ¥ BURBANK, CALIF. 91502-2102 ¥ 818/840-9484 ¥ FAX 818/840-9485 tions is provided by the PA interface. ¥ Each DR-3000 or DR-4000 Repeater added to the Intelligent PA system adds another possible PA output to it. ¥ The PA system can act as a bridge to run animation systems, Digital Audio Repeaters, etc. from PA stations.
PAGE 22
GILDERFLUKE & CO. ¥ 205 SOUTH FLOWER S T. ¥ BURBANK, CALIF. 91502-2102 ¥ 818/840-9484 ¥ FAX 818/840-9485 EXT. INPUTS EXT. INPUTS EXT. INPUTS BGM input (1 or 8) Analog Output Local PA Outputs (8) EXT. INPUTS BGM input (1 or 8) EXT. INPUTS EXT. INPUTS MA-100 PA Master EXT. INPUTS Serial Port Printer Port EXT. INPUTS UP TO 256 DIGITAL REPEATER/ MIXER CARDS UP TO 256 PA/INTERCOM STATIONS EXT.
PAGE 23
GILDERFLUKE & CO. ¥ 205 SOUTH FLOWER S T. ¥ BURBANK, CALIF. 91502-2102 ¥ 818/840-9484 ¥ FAX 818/840-9485 also be requested and PA Zones accessed through the serial port if needed. SMART PA STATIONS are available with up to eighteen buttons on their microphones. Any button can be configured to request any other intercom station, mute or half-mute zone, send commands to one or more AB/DR-3000s, or ramp the volume of any volume control zone up or down.
PAGE 24
GILDERFLUKE & CO. ¥ 205 SOUTH FLOWER S T. ¥ BURBANK, CALIF.
PAGE 25
GILDERFLUKE & CO. ¥ 205 SOUTH FLOWER S T. ¥ BURBANK, CALIF. 91502-2102 ¥ 818/840-9484 ¥ FAX 818/840-9485 - AB-3000, CARD CAGE AND POWER SUPPLYCONNECTIONS Each CC-3016 card cage holds sixteen DR-3000s or DR-4000s. The CC-3004 holds up to four DR3000s or DR-4000s. All card cage slots on each motherboard will accept any DR-3000. Slot number 0 has an additional 15 position connector that is used by DR-4000s to bring analog and digital inputs to the card.
PAGE 26
GILDERFLUKE & CO. ¥ 205 SOUTH FLOWER S T. ¥ BURBANK, CALIF. 91502-2102 ¥ 818/840-9484 ¥ pin # 1 2 3 4 5 6 (left) (right) COLOR WHITE BLACK RED GREEN YELLOW BLUE FAX 818/840-9485 SIGNAL NAME: signal ground - serial data OUT from AB/DR-3000 + serial data OUT from AB/DR-3000 - serial data IN to AB/DR-3000 + serial data IN to AB/DR-3000 signal ground The proper data format, and pinouts for connecting this plug to a PC or Macintosh computer are in the section of the manual on Serial Port Commands.
PAGE 27
GILDERFLUKE & CO. ¥ 205 SOUTH FLOWER S T. ¥ BURBANK, CALIF. 91502-2102 ¥ 818/840-9484 ¥ FAX 818/840-9485 these inputs. Be aware that this supply is not isolated from the others. This defeats the opto isolation and there is a possibility of AB/DR-3000s getting ÔzappedÕ through this connection. The DR-3000 can only be attached as shown above for ÔExternal PowerÕ. The AB-3000 has the option of running from ÔInternal PowerÕ. This allows simple Ôswitch closuresÕ to be used with the AB-3000.
PAGE 28
GILDERFLUKE & CO. ¥ 205 SOUTH FLOWER S T. ¥ BURBANK, CALIF. 91502-2102 ¥ 818/840-9484 ¥ Pin Pin Pin Pin Pin #1 #2 #3 #4 #5 FAX 818/840-9485 SIGNAL NAME: Ground N/C + 5 VDC - 12 to 15 VDC + 12 to 15 VDC This is the only power supply connection on the AB-3000 AudioBrick. g) Audio Outputs: Twenty-five position female DB-25 connector. This is used for the balanced audio outputs from the DR-3000 and DR-4000s installed in the card cage. CC-3004 Card cages have one of these connectors on them.
PAGE 29
GILDERFLUKE & CO. ¥ 205 SOUTH FLOWER S T. ¥ BURBANK, CALIF.
PAGE 30
GILDERFLUKE & CO. ¥ 205 SOUTH FLOWER S T. ¥ BURBANK, CALIF. 91502-2102 ¥ 818/840-9484 ¥ FAX 818/840-9485 output is limited to driving low current loads like solid state relays, optoisolators, logic level inputs and LEDs. When attaching to a logic input, just use pullup resistors (4.7 Kohm typically) to the logic Vcc, and pick up to output at the DE-09 output pin. For the base resistor in series with a LED, use a 1 K at 5 volts, 2.2 K at 12 volts, and a 4.7 K at 24 volts.
PAGE 31
GILDERFLUKE & CO. ¥ 205 SOUTH FLOWER S T. ¥ BURBANK, CALIF. 91502-2102 ¥ 818/840-9484 ¥ FAX 818/840-9485 - AB/DR-3000 FRONT PANEL There are several adjustments that can be made through the front panel of a AB/DR-3000. In addition the front panel displays various AB/DR-3000 conditions. Chief among these is the AB/DR-3000 heartbeat. This is shown as the decimal point of the ÔselectÕ display.
PAGE 32
GILDERFLUKE & CO. ¥ 205 SOUTH FLOWER S T. ¥ BURBANK, CALIF. 91502-2102 ¥ 818/840-9484 ¥ FAX 818/840-9485 1) Left Volume: This selection is used to adjust the level of this audio output from the AB/DR-3000. The range of adjustment is from 0-99 (default value = 99). This adjustment is linear, which means that a setting of Ô50Õ is pretty close to a 50% output level. 2) Left Half Mute: This selection is used to adjust the level this audio output from the AB/DR-3000 when the HALF MUTED audio level is selected.
PAGE 33
GILDERFLUKE & CO. ¥ 205 SOUTH FLOWER S T. ¥ BURBANK, CALIF. 91502-2102 ¥ 818/840-9484 ¥ FAX 818/840-9485 any RTC value is changed. h) Hour: Available only if Real Time Clock (RTC) option is installed. The range of adjustment is from 0-23. If any RTC adjustment is changed, the ÔSelectÕ digit will start flashing to indicate that the new settings will be written to the RTC chip the instant the ÔselectÕ is returned to the ÔhomeÕ position (display blanked).
PAGE 34
GILDERFLUKE & CO. ¥ 205 SOUTH FLOWER S T. ¥ BURBANK, CALIF. 91502-2102 ¥ 818/840-9484 ¥ FAX 818/840-9485 - Front Panel Display Messages There are a number of different messages that the AB/DR-3000 can display on its front. Some of these you will see regularly as the repeater operates. Others you may never see. The ÔSelectÕ digit lights to show what the two other digits are trying to tell you.
PAGE 35
GILDERFLUKE & CO. ¥ 205 SOUTH FLOWER S T. ¥ BURBANK, CALIF. 91502-2102 ¥ 818/840-9484 ¥ FAX 818/840-9485 Universal Error Messages: 00: Microcontroller failed to establish contact with the Digital Signal Processor. This means that there is a hardware problem that has locked up the AB/DR-3000Õs DSP. This is not one of those messages you want to see. 01: No Sound Loaded: The DSP was unable to find any valid sound memory.
PAGE 36
GILDERFLUKE & CO. ¥ 205 SOUTH FLOWER S T. ¥ BURBANK, CALIF. 91502-2102 ¥ 818/840-9484 ¥ FAX 818/840-9485 - AB/DR-3000 HARDWARECONFIGURATIONThere are four that are set using jumpers on each card. With the exception of the jumper which is used to enable and disable the EEPROM, you should never have to adjust any of these. JUMPER ADJUSTMENTS: JP4) A18 or /WR: This jumper selects what signal will be sent to pin number thirty-one on the AB/DR-3000Õs onboard EPROM sockets.
PAGE 37
GILDERFLUKE & CO. ¥ 205 SOUTH FLOWER S T. ¥ BURBANK, CALIF. 91502-2102 ¥ 818/840-9484 ¥ FAX 818/840-9485 - AB/DR-3000 SOFTWARE CONFIGURATIONThe configuration on a AB/DR-3000 tells it what you want to happen when it receives signals on its inputs and what it does on its outputs. Typically the configuration needs only be done once on each unit. There is only one way to configure a AB/DR-3000. This is through the serial port.
PAGE 38
GILDERFLUKE & CO. ¥ 205 SOUTH FLOWER S T. ¥ BURBANK, CALIF. 91502-2102 ¥ 818/840-9484 ¥ FAX 818/840-9485 The key can be used to erase the last character entered. If you have already entered some characters, the ape key can be used to erase all the characters you have entered thus far. If you try to enter more characters than the command calls for, the extra keystrokes will ÔscrollÕ. Hitting the key will tell the AB/DR-3000 to accept your entry as typed.
PAGE 39
GILDERFLUKE & CO. ¥ 205 SOUTH FLOWER S T. ¥ BURBANK, CALIF. 91502-2102 ¥ 818/840-9484 ¥ FAX 818/840-9485 accept bad signals and trigger the wrong spiels. Too large of a value can delay the start of a spiel. The default value is eight. ¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥ ÒeÓ DMX Channels: Each AB/DR-3000 can listen to as many as four DMX-512 data channels at one time.
PAGE 40
GILDERFLUKE & CO. ¥ 205 SOUTH FLOWER S T. ¥ BURBANK, CALIF. 91502-2102 ¥ 818/840-9484 ¥ FAX 818/840-9485 using SMPTE at 25 FPS, donÕt try to trigger sounds on the 26th frame. The AB/DR-3000Õs SMPTE input should follow SMPTE with a speed variation of approximately 25% from 30 FPS. The AB/DR-3000s check for any spiels they might need to trigger one second ahead of the SMPTE time they are receiving. If one is found then they use the incoming SMPTE frame number to trigger the spiel.
PAGE 41
GILDERFLUKE & CO. ¥ 205 SOUTH FLOWER S T. ¥ BURBANK, CALIF. 91502-2102 ¥ 818/840-9484 ¥ LEFT RIGHT FAX 818/840-9485 NAME Ground COLOR WHITE SIGNAL FUNCTION Signal Ground n/c n/c BLACK RED no connection no connection - TxD + TxD GREEN YELLOW - DATA IN TO AB/DR-3000 (use DMX-512 - Input) + DATA IN TO AB/DR-3000 (use DMX-512 + Input) Ground BLUE Signal Ground Besides these connections, the IR Receiver requires a 7 to 24 volt DC power supply connection.
PAGE 42
GILDERFLUKE & CO. ¥ 205 SOUTH FLOWER S T. ¥ BURBANK, CALIF. 91502-2102 ¥ 818/840-9484 ¥ FAX 818/840-9485 The IR mode has some special features to keep it from continuously starting the same spiel several times each second when an IR signal is continuously applied. Once a spiel has been started by an IR input, that same spiel can not be retriggered by the IR until it has stopped playing. Any other spiel can be triggered immediately.
PAGE 43
GILDERFLUKE & CO. ¥ 205 SOUTH FLOWER S T. ¥ BURBANK, CALIF. 91502-2102 ¥ 818/840-9484 ¥ FAX 818/840-9485 44,100 th of a second. If the card that started the group is also set to loop, then at the end of its spiel it will DELAY as needed, and resend the start command down the Bus. This mode allows any number of DR-3000s to be perfectly synchronized as a replacement for bin loop tape decks.
PAGE 44
GILDERFLUKE & CO. ¥ 205 SOUTH FLOWER S T. ¥ BURBANK, CALIF. 91502-2102 ¥ 818/840-9484 ¥ FAX 818/840-9485 DR-3000 will respond to. When a channel is responding to a PA request, its output is set to the ÔHalf MutedÕ level, and the audio from the appropriate Digital Audio Bus channel is routed to that output. PA zones enabled for the Left or Right channel will each use up one of the four Digital Audio Bus connections available on each DR-3000 26.
PAGE 45
GILDERFLUKE & CO. ¥ 205 SOUTH FLOWER S T. ¥ BURBANK, CALIF. 91502-2102 ¥ 818/840-9484 ¥ FAX 818/840-9485 initial 'X', all the other AB/DR-3000s wait for a 'Y' or 'N' before they will start accepting other serial commands again. If you find that you are having trouble communicating with any of the AB/DR-3000s in the system, try entering an ÔXNÕ to trick it into thinking you have exited the configuration mode.
PAGE 46
GILDERFLUKE & CO. ¥ 205 SOUTH FLOWER S T. ¥ BURBANK, CALIF. 91502-2102 ¥ 818/840-9484 ¥ FAX 818/840-9485 - TRIGGER MENU This menu is used to set what the 1/4 J6 inputs and manual start pushbutton on the front of the AB/DR-3000 will do. If the Mirror DMX ÔaÕ to Trigger Inputs option is ON, DMX channel ÔaÕ is routed to the AB/DR-3000 in parallel with the 1/4 J6 inputs.
PAGE 47
GILDERFLUKE & CO. ¥ 205 SOUTH FLOWER S T. ¥ BURBANK, CALIF. 91502-2102 ¥ 818/840-9484 ¥ FAX 818/840-9485 bit 6: The closing edge of this bit starts the next spiel (or any previously requested spiel) Looping after a Start Delay. This command is being relayed down the bus via the Group Start modifier, so that all cards with the same group number assigned will play in perfect synchronization. There is no action on the opening edge.
PAGE 48
GILDERFLUKE & CO. ¥ 205 SOUTH FLOWER S T. ¥ BURBANK, CALIF. 91502-2102 ¥ 818/840-9484 ¥ FAX 818/840-9485 ume back to the normal level C) 100% Mute / Half Mute / Un Mute: The first press will half mute the audio, the next press will mute the audio fully, and the third press will return the volume back to the normal level D) Any Start, Start modifier (Delayed Start , Loop or Group Start), or Spiel Request command.
PAGE 49
GILDERFLUKE & CO. ¥ 205 SOUTH FLOWER S T. ¥ BURBANK, CALIF. 91502-2102 ¥ 818/840-9484 ¥ FAX 818/840-9485 C) Fade Out / Un Mute: On every press the repeater will immediately return the audio level to the normal level, and the Fade Out command will then ramp the audio down from there.
PAGE 50
GILDERFLUKE & CO. ¥ 205 SOUTH FLOWER S T. ¥ BURBANK, CALIF. 91502-2102 ¥ 818/840-9484 ¥ FAX 818/840-9485 Commands which should NOT be used in combination on the same command line are: A) Stop at End / Start Track wo/Looping Modifier: Although this doesnÕt do anything abnormal, a spiel which isnÕt looping will stop at its end with or without the Stop at End command. B) Stop at End / Stop Immediately: The Stop Immediately command takes precedence over the Stop at End command.
PAGE 51
GILDERFLUKE & CO. ¥ 205 SOUTH FLOWER S T. ¥ BURBANK, CALIF. 91502-2102 ¥ 818/840-9484 ¥ FAX 818/840-9485 you will need to set Early Starts to Stored, and then request the new spiel along with a Start command w/looping set. The spiel request will be stored and take effect as soon as the current spiel ends. This modifier has no effect if used without the Start command. D) Group Starts: This is a special mode which can be used with card cage mounted DR-3000s only.
PAGE 52
GILDERFLUKE & CO. ¥ 205 SOUTH FLOWER S T. ¥ BURBANK, CALIF. 91502-2102 ¥ 818/840-9484 ¥ FAX 818/840-9485 ure eightÕ pattern. The left (or stereo) will be shown in the left digit of the ÔvalueÕ display, and the right will be shown in the right digit. If this modifier is set along with either of the other loop modifiers, then the repeater will immediately start the first loop delay, so the LEDs on the front of the repeater will chase the segments in a ÔoÕ instead of the Ôfigure eightÕ.
PAGE 53
GILDERFLUKE & CO. ¥ 205 SOUTH FLOWER S T. ¥ BURBANK, CALIF. 91502-2102 ¥ 818/840-9484 ¥ FAX 818/840-9485 second. There is no error or collision detection, so it is up to you to make sure that no two Group Start commands are sent at the same time. Collisions can never happen if there is only one card that is transmitting Group Start commands within a cage.
PAGE 54
GILDERFLUKE & CO. ¥ 205 SOUTH FLOWER S T. ¥ BURBANK, CALIF. 91502-2102 ¥ 818/840-9484 ¥ FAX 818/840-9485 ¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥ ÒoÓ Reload Defaults: This command is used to reload the default conditions for the variables set on the Trigger Menu of the AB/DR-3000.
PAGE 55
GILDERFLUKE & CO. ¥ 205 SOUTH FLOWER S T. ¥ BURBANK, CALIF. 91502-2102 ¥ 818/840-9484 ¥ FAX 818/840-9485 - SMPTE TRIGGER MENU SMPTE (pronounced ÒSIMP-TÒ) is a time code that was developed by the Society of Motion Picture and Television Electronics (SMPTE) for use in audio, film, and television production. It is normally recorded on a spare audio track on the medium being used (audio tape, video tape, or film), and then used to synchronize various pieces of compatible equipment together.
PAGE 56
GILDERFLUKE & CO. ¥ 205 SOUTH FLOWER S T. ¥ BURBANK, CALIF. 91502-2102 ¥ 818/840-9484 ¥ FAX 818/840-9485 spiel. This allows the SMPTE triggers to be handled at a high priority interrupt level for the greatest possible accuracy. If that frame is missed for any reason, or if a bit is missed which makes the SMPTE reader do a search for the sync word after it is found in the table but before it is played, the sound will not be played.
PAGE 57
GILDERFLUKE & CO. ¥ 205 SOUTH FLOWER S T. ¥ BURBANK, CALIF. 91502-2102 ¥ 818/840-9484 ¥ FAX 818/840-9485 - REAL TIME CLOCK TRIGGER MENU The AB/DR-3000 can be fitted with an optional real time clock. The clock has been factory laser trimmed to be accurate within ten parts per million. A battery keeps the clock running even during power failures. This menu is available only if this hardware option has been installed. -Sixteen Bit Digital Audio System rev 1.19 copyright 1996 Gilderfluke & Co.
PAGE 58
GILDERFLUKE & CO. ¥ 205 SOUTH FLOWER S T. ¥ BURBANK, CALIF. 91502-2102 ¥ 818/840-9484 ¥ FAX 818/840-9485 both outputs. Stereo spiels are always send to both outputs. You can enter a zero at this point if you are just clearing an existing entry. 2) Spiel number to be triggered, or zero for whatever spiel is next 31 . 3) Time the spiel is to be played (HOURS and MINUTES). Entries to the schedules must be made consecutively.
PAGE 59
GILDERFLUKE & CO. ¥ 205 SOUTH FLOWER S T. ¥ BURBANK, CALIF. 91502-2102 ¥ 818/840-9484 ¥ FAX 818/840-9485 the new settings will be written to the RTC chip the instant the ÔselectÕ is returned to the ÔhomeÕ position (display blanked). This value will continue to indicate the current time until any RTC value is changed. It will then stop advancing. n) moNth: Available only if Real Time Clock (RTC) option is installed. The range of adjustment is from 0-12.
PAGE 60
GILDERFLUKE & CO. ¥ 205 SOUTH FLOWER S T. ¥ BURBANK, CALIF. 91502-2102 ¥ 818/840-9484 ¥ FAX 818/840-9485 Ôh) hours for tolling- 00:00-02:00 / 08:00 to 23:59Õ This is the setting you use if you want to let your neighbors sleep. Assuming the previous day has also been set in the same way, it will carry the tolling up through 23:59 before this dayÕs schedule takes over. If the next dayÕs schedule is also set in the same way then it will pick up at midnight of the next morning.
PAGE 61
GILDERFLUKE & CO. ¥ 205 SOUTH FLOWER S T. ¥ BURBANK, CALIF. 91502-2102 ¥ 818/840-9484 ¥ FAX 818/840-9485 - VOLUME MENU This menu is used to set the levels of the outputs, and what sets them to that level. -Sixteen Bit Digital Audio System rev 1.19 copyright 1996 Gilderfluke & Co. DCM- card __0 Volume Menu e) Left ramp up- 1.0 sec. | g) Right ramp up- 1.0 sec. f) Left ramp down- 1.0 sec. | h) Right ramp down- 1.0 sec.
PAGE 62
GILDERFLUKE & CO. ¥ 205 SOUTH FLOWER S T. ¥ BURBANK, CALIF. 91502-2102 ¥ 818/840-9484 ¥ FAX 818/840-9485 ¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥ ÒeÓ Left Ramp Up: ÒfÓ Left Ramp Down: ÒgÓ Right Ramp Up: ÒhÓ Right Ramp Down: The left and right outputs can be told to fade in or fade out when signals are received through the 1/4 J6 inputs. This is set on the Trigger Menu.
PAGE 63
GILDERFLUKE & CO. ¥ 205 SOUTH FLOWER S T. ¥ BURBANK, CALIF. 91502-2102 ¥ 818/840-9484 ¥ FAX 818/840-9485 3) The volume control source, default level, and upper and lower limits for the Digital Audio Bus Channel. When sending audio to the Digital Audio Bus, a ÔFixedÕ level of 99% is typically used. The PA System, when used with a DR-3000, uses the Digital Audio Bus for sending PA announcements to the DR-3000s.
PAGE 64
GILDERFLUKE & CO. ¥ 205 SOUTH FLOWER S T. ¥ BURBANK, CALIF. 91502-2102 ¥ 818/840-9484 ¥ FAX 818/840-9485 4) Clock. This is where you setup the eight possible schedules, tolls, and set the clock. This menu is available only if the Real Time Clock option has been installed on the AB/DR-3000. 5) Volume. This selects this menu. 6) Status Outputs. This is where you setup what the two status outputs do. 7) Diagnostics. This displays the status of the mutes zones, switch, analog, and DMX inputs.
PAGE 65
GILDERFLUKE & CO. ¥ 205 SOUTH FLOWER S T. ¥ BURBANK, CALIF. 91502-2102 ¥ 818/840-9484 ¥ FAX 818/840-9485 - STATUS OUTPUTS MENU The AB/DR-3000 has two optically isolated status outputs. This menu is used to control how they are used. They can be set to operate when the left or right repeaters are playing, at specific periods (if the Real Time Clock Option has been installed), or at specific points during a spiel being played out of the left side of the repeater (or a stereo spiel).
PAGE 66
GILDERFLUKE & CO. ¥ 205 SOUTH FLOWER S T. ¥ BURBANK, CALIF. 91502-2102 ¥ 818/840-9484 ¥ FAX 818/840-9485 ¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥ ÒbÓ Pulse Length: When an output is pulsed, this command is used to set how long the outputs will stay active for. These are entered in tenths of seconds between .1 and 9.9 seconds.
PAGE 67
GILDERFLUKE & CO. ¥ 205 SOUTH FLOWER S T. ¥ BURBANK, CALIF. 91502-2102 ¥ 818/840-9484 ¥ FAX 818/840-9485 depressing both the up and down keys simultaneously as power is first applied to the AB/DR-3000. ¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥ ÒxÓ eXit Setup Mode: This command is used to exit the setup mode.
PAGE 68
GILDERFLUKE & CO. ¥ 205 SOUTH FLOWER S T. ¥ BURBANK, CALIF. 91502-2102 ¥ 818/840-9484 ¥ FAX 818/840-9485 - INPUT DIAGNOSTICSMENU This screen is used to check the status of the various hardware and software inputs to the AB/DR3000. This is often used to help in diagnosing problems with the AB/DR-3000, or just for testing connections to it. -Sixteen Bit Digital Audio System rev 1.19 copyright 1996 Gilderfluke & Co.
PAGE 69
GILDERFLUKE & CO. ¥ 205 SOUTH FLOWER S T. ¥ BURBANK, CALIF. 91502-2102 ¥ 818/840-9484 ¥ FAX 818/840-9485 For compatibility with other products that might be on the same RS-422 serial network, this command asks you to enter a ÔYÕ or ÔNÕ. This lets them know that the setup mode has been exited on this card. If you hit this command by mistake, then you can hit the ape key to get back to where you were before.
PAGE 70
GILDERFLUKE & CO. ¥ 205 SOUTH FLOWER S T. ¥ BURBANK, CALIF.
PAGE 71
GILDERFLUKE & CO. ¥ 205 SOUTH FLOWER S T. ¥ BURBANK, CALIF. 91502-2102 ¥ 818/840-9484 ¥ FAX 818/840-9485 - AB/DR-3000 SERIAL PORT COMMANDS The AB/DR-3000 can be controlled by simple switch closures to start and stop playback or looping, mute the audio, and perform a variety of functions. Along with this method of controlling the AB/DR3000s, you can talk to as many as 255 AB/DR-3000s at one time through a serial data line from your computer, terminal, or control system.
PAGE 72
GILDERFLUKE & CO. ¥ 205 SOUTH FLOWER S T. ¥ BURBANK, CALIF. 91502-2102 ¥ 818/840-9484 ¥ FAX 818/840-9485 Otherwise it might over run the AB/DR-3000sÕ incoming data buffer. If you have hooked up the AB/DR-3000s to your computer and it still doesnÕt seem to respond to the keyboard, the first thing to check is that you are attached to the right serial port.
PAGE 73
GILDERFLUKE & CO. ¥ 205 SOUTH FLOWER S T. ¥ BURBANK, CALIF. 91502-2102 ¥ 818/840-9484 ¥ FAX 818/840-9485 the command. 3) GROUP - There are sixteen possible groups in the AB/DR-3000. They are numbered from '0' through 'F'. You can configure any AB/DR-3000 in the system to respond to any one of these different groups (see the configuration sections of this manual for instructions on how to do this). Commands of this type affect all cards that have the matching GROUP NUMBER.
PAGE 74
GILDERFLUKE & CO. ¥ 205 SOUTH FLOWER S T. ¥ BURBANK, CALIF. 91502-2102 ¥ 818/840-9484 ¥ FAX 818/840-9485 ¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥ "a" (CARD#) Enter Setup Echo Mode: This command puts the one AB/DR-3000 addressed by the CARD# into this mode while taking all other AB/DR-3000s out of this mode.
PAGE 75
GILDERFLUKE & CO. ¥ 205 SOUTH FLOWER S T. ¥ BURBANK, CALIF. 91502-2102 ¥ 818/840-9484 ¥ FAX 818/840-9485 EXAMPLE: to put AB/DR-3000 addressed at 55h into ECHO ALL mode: e 5 5 EXAMPLE: a 'START CARD# 00' command will echo: t00 ¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥ "f" Exit Echo All Mode: This command takes all AB/DR-3000s in the system out of ECHO ALL MODE.
PAGE 76
GILDERFLUKE & CO. ¥ 205 SOUTH FLOWER S T. ¥ BURBANK, CALIF. 91502-2102 ¥ 818/840-9484 ¥ FAX 818/840-9485 a: xn The other AB/DR-3000s will then start listening to you again. ¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥ "q" (CARD#) 1/4 J6 Input Status: This command responds with the current status of the 1/4 J6 input for the AB/DR-3000 specified by the CARD#.
PAGE 77
GILDERFLUKE & CO. ¥ 205 SOUTH FLOWER S T. ¥ BURBANK, CALIF. 91502-2102 ¥ 818/840-9484 ¥ FAX 818/840-9485 2) Tell your computer to send this file through the serial port to the repeaters. The same string of gibberish you saw during the Configuration Dump command will go shooting by as it is reloaded into the the addressed AB/DR-3000s.
PAGE 78
GILDERFLUKE & CO. ¥ 205 SOUTH FLOWER S T. ¥ BURBANK, CALIF.
PAGE 79
GILDERFLUKE & CO. ¥ 205 SOUTH FLOWER S T. ¥ BURBANK, CALIF. 91502-2102 ¥ 818/840-9484 ¥ FAX 818/840-9485 2) A stop command is received. 3) A start command is received. 4) A stop-at-end command is received. If the AB/DR-3000 that is looping has a delay set, then this delay will be inserted between each iteration of the loop. This allows you to record a fairly short announcement and put a long enough delay between each iteration that it won't drive everyone crazy.
PAGE 80
GILDERFLUKE & CO. ¥ 205 SOUTH FLOWER S T. ¥ BURBANK, CALIF. 91502-2102 ¥ 818/840-9484 ¥ FAX 818/840-9485 ¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥¥ "?" (HALF-MASK) (FULL-MASK) Mute Mask: This command usually comes from the PA MASTER to a AB/DR-3000. It is followed by an eight bit halfmute mask and an eight bit full-mute mask.
PAGE 81
GILDERFLUKE & CO. ¥ 205 SOUTH FLOWER S T. ¥ BURBANK, CALIF.
PAGE 82
GILDERFLUKE & CO. ¥ 205 SOUTH FLOWER S T. ¥ BURBANK, CALIF.
PAGE 83
GILDERFLUKE & CO. ¥ 205 SOUTH FLOWER S T. ¥ BURBANK, CALIF. 91502-2102 ¥ 818/840-9484 ¥ FAX 818/840-9485 - MX-1000 MEMORY EXPANSIONBOARDSFOR USE WITH AB/DR-3000 DIGITAL AUDIO REPEATERS A MX-1000 Memory Expansion Board is used to increase the capacity of a AB/DR-3000 by thirty-two additional memory chips. Up to fifteen of these memory expansion cards can be used on any AB/DR3000 within the physical space limitations of the AB/DR-3000 housing.
PAGE 84
GILDERFLUKE & CO. ¥ 205 SOUTH FLOWER S T. ¥ BURBANK, CALIF. 91502-2102 ¥ 818/840-9484 ¥ FAX 818/840-9485 - INSTALLATION & CONFIGURATIONEach MX-1000 plugs into JP2A (1 x 30 pin header), JP2B (1 x 10 pin header), and JP3 (1 x 24 pin header) on the AB/DR-3000. The first MX-1000 is mounted on the four 7/16Ó tall standoffs using four 1/4Ó long round head machine screws.
PAGE 85
GILDERFLUKE & CO. ¥ 205 SOUTH FLOWER S T. ¥ BURBANK, CALIF. 91502-2102 ¥ 818/840-9484 ¥ FAX 818/840-9485 - SOUND COMPRESSORSOFTWAREFOR USE WITH AB/DR-3000 DIGITAL AUDIO REPEATERS The Sound Compression Software is the small program that will turn industry-standard .AIFF (Macintosh and Amiga), .SD (Sound Designer I) or .WAV (Windows) sound files into a set of ROM-sized files which can then be loaded into memory chips for installation in AB/DR-3000 Digital Audio Repeaters.
PAGE 86
GILDERFLUKE & CO. ¥ 205 SOUTH FLOWER S T. ¥ BURBANK, CALIF. 91502-2102 ¥ 818/840-9484 ¥ FAX 818/840-9485 Files will be added to the list on the selected line, or if none are selected, they will be added to the end of the list. You can use + or to select multiple files. The program will not let you mix mono and stereo samples on the same repeater.
PAGE 87
GILDERFLUKE & CO. ¥ 205 SOUTH FLOWER S T. ¥ BURBANK, CALIF. 91502-2102 ¥ 818/840-9484 ¥ FAX 818/840-9485 a Ô486-66 PC should take about four times longer than the actual sound. The faster the computer, the less time the compression will take. Clicking on the OK button will start the process of compressing and building the EPROM files.
PAGE 88
GILDERFLUKE & CO. ¥ 205 SOUTH FLOWER S T. ¥ BURBANK, CALIF.
PAGE 89
GILDERFLUKE & CO. ¥ 205 SOUTH FLOWER S T. ¥ BURBANK, CALIF.
PAGE 90
GILDERFLUKE & CO. ¥ 205 SOUTH FLOWER S T. ¥ BURBANK, CALIF.
PAGE 91
GILDERFLUKE & CO. ¥ 205 SOUTH FLOWER S T. ¥ BURBANK, CALIF. 91502-2102 ¥ 818/840-9484 ¥ 15 16 17 18 19 20 21 22 23 24 Sd 9 Sd 10 Sd 11 Sd 12 Sd 13 Sd 14 Sd 15 Ground Ground Ground - JP4 - 1 x 3 Header - Write Enable 1 2 3 SA 18 MEM2 /WR - JP5 - 1 x 3 Header - Flash Enable 1 2 3 V+ Vpp SA 19 - JP6 - 1 x 2 Header - Clock Enable 1 2 U24 #12 Ground - JP7 - 1 x 2 Header - Write Protect 1 2 3 Ground U50 #1 Vcc - JP8 - 2 x 10 Header - Front Panel Connector 1 2 3 4 5 6 PORT 4.0 (LED SEGMENT ÔCÕ) PORT 4.
PAGE 92
GILDERFLUKE & CO. ¥ 205 SOUTH FLOWER S T. ¥ BURBANK, CALIF. 91502-2102 ¥ 818/840-9484 ¥ 7 8 9 10 11 12 13 14 15 16 17 18 19 20 FAX 818/840-9485 PORT 4.6 (LED SEGMENT ÔBÕ) PORT 4.7 (LED SEGMENT ÔGÕ) PORT 5.0 (LED SELECT 0) PORT 5.1 (LED SELECT 1) PORT 5.2 (LED SELECT 2) PORT 5.3 (LED SELECT 3) (not used) PORT 5.4 (ÔUPÕ BUTTON) PORT 5.5 (ÔDOWNÕ BUTTON) PORT 5.6 (ÔSELECTÕ BUTTON) PORT 5.
PAGE 93
GILDERFLUKE & CO. ¥ 205 SOUTH FLOWER S T. ¥ BURBANK, CALIF.
PAGE 94
GILDERFLUKE & CO. ¥ 205 SOUTH FLOWER S T. ¥ BURBANK, CALIF. 91502-2102 ¥ 818/840-9484 ¥ FAX 818/840-9485 14 Analog Ref. 4 YELLOW CH. 4 (03H) Negative Reference 15 16 Analog Input 3 Analog Ref. 3 GREEN BLUE CH. 3 (02H) Positive Analog Input (19 A) CH. 3 (02H) Negative Reference 17 18 Analog Input 2 Analog Ref. 2 VIOLET GRAY CH. 2 (01H) Positive Analog Input (20 A) CH. 2 (01H) Negative Reference 19 20 Analog Input 1 Analog Ref. 1 WHITE BLACK CH. 1 (00H) Positive Analog Input (21 A) CH.
PAGE 95
GILDERFLUKE & CO. ¥ 205 SOUTH FLOWER S T. ¥ BURBANK, CALIF.
PAGE 96
GILDERFLUKE & CO. ¥ 205 SOUTH FLOWER S T. ¥ BURBANK, CALIF.
PAGE 97
GILDERFLUKE & CO. ¥ 205 SOUTH FLOWER S T. ¥ BURBANK, CALIF.
PAGE 98
GILDERFLUKE & CO. ¥ 205 SOUTH FLOWER S T. ¥ BURBANK, CALIF.
PAGE 99
GILDERFLUKE & CO. ¥ 205 SOUTH FLOWER S T. ¥ BURBANK, CALIF.
PAGE 100
GILDERFLUKE & CO. ¥ 205 SOUTH FLOWER S T. ¥ BURBANK, CALIF. 91502-2102 ¥ 818/840-9484 ¥ FAX 818/840-9485 - DECIMAL TO HEXADECIMAL TO ASCII TO PERCENTAGE The following chart shows decimal, HEXadecimal, ASCII and a few percentage equivalents to aid you when you need to convert between numbering bases. Also shown are the ÔspecialÕ characters used by PC¥MACs and Smart Brick Animation Control Systems.