Manual

'AutoDownload' file. The 'nn' is the HEXadecimal address of the first channel
in the AutoDownload set. If you are AutoDownloading to a number of differ-
ent cards, you can use the same name for all of them without fear of over-
writing the others since they will automatically have different ‘extensions’.
This file can be sent to any other BR-MultiBrick32 at any time using a com-
puter and a terminal program like terminal.exe or our GilderTerm. HyperT-
erm.exe will not work for this, because it randomly alters values above 128
in the AutoDownload file.
The address of the data sent out from Flash memory may be different
from what you saw when programming through the DMX-512 or serial
input. This is a question of the address selected for the BR-MultiBrick32 and
address range selected for the data when sending the AutoDownload file.
The BR-MultiBrick32 always uses the address saved in the AutoDownload file
for its outputs. This is normally what you want to do.
GILDERFLUKE & CO .• 205 SOUTH FLOWER STREET • BURBANK , CALIFORNIA 91502 • 818/840-9484 • 800/776-5972 • FAX [phone]
E
AST COAST /FLORIDA OFFICE • 7041 GRAND NATIONAL DRIVE • SUITE 128d • ORLANDO , FL. 32819 • 407/354-5954 • FAX [phone]
20 of 36