Manual

“i” (card address) Card Status:
The status screen is a snapshot image of the current status of
the BR-SmartMedia. If you want to update the status information
displayed, you must hit the ‘Card Status’ command a second
time.
When the BR-SmartMedia receives this command, it will re-
spond with the following information:
a) Company: Gilderfluke & Co.
b) Product name: BR-SmartMedia
c) Current mode of operation
d) Firmware revision number and copyright.
e) Information on the currently loaded AutoDownload file:
1) AutoDownload file name (in DOS 8.3 format).
2) Number of channels in the AutoDownload file.
3) Number of shows in the AutoDownload file.
f) Card serial address.
g) If it is a ‘MultiShow’ Brick:
1) Whether each of the eight sequencers is running,
stopped, looping, paused or E-Stopped.
2) The current status of the ten optically isolated inputs.
h) If it is a 'Smart' Brick:
1) The frame number currently being accessed by the
'Smart' Brick Network.
i) If it is a ‘Dumb’ Brick:
1) Whether the BR-SmartMedia is running, stopped, loop-
ing or paused.
2) The current status of the four optically isolated inputs.
The following shows a BR-SmartMedia information status re-
sponse for a BR-SmartMedia card which is receiving DMX-512. The
‘MultiShow’ and ‘Serial’ modes are identical in operation when re-
ceiving DMX-512:
Gilderfluke & Company
BR-SmartMedia in Multi-Show Mode
version 1.22 - copyright 2003 DCM-
__9 shows with 232 channels @ __0 Offset / Set FileName is CROOM1__.A00
Card Address- __0
Receiving DMX-512
GILDERFLUKE & CO .• 205 SOUTH FLOWER STREET • BURBANK , CALIFORNIA 91502 • 818/840-9484 • 800/776-5972 • FAX [phone]
E
AST COAST /FLORIDA OFFICE • 7041 GRAND NATIONAL DRIVE • SUITE 128d • ORLANDO , FL. 32819 • 407/354-5954 • FAX [phone]
26 of 81