Owner manual

Although any E-Stop error will stop the HPU, as soon as the E-Stop show
has started running the HPU can be restarted. By using this jumper in addi-
tion to the E-Stop jumper, the HPU cannot be restarted until the error condi-
tion is cleared. A typical example of this featureʼs use is on the input used for
the HPU oil level sensor. If the oil level is low, the Kp-300 will E-Stop the
system and not allow the HPU to be restarted until some more oil is added
to the system.
Gilderfluke & Co.• 205 South Flower Street • Burbank, California 91502 • 818/840-9484 • 800/776-5972 • fax [phone]
Kp-300 Manual / September 4, 2012 4:29 PM / page 33 of 75