Owner manual

tem. The v3.0+ Kp-300 has a separate pair of screw terminals for attaching

the 24 vdc supply.

Not surprisingly, the inputs to the Kp-300 are all compatible with the digi-

tal outputs on all of our animation control systems. In most cases the digital

outputs will be coming from a Z-Brick.

The digital output from all Gilderﬂuke & Co, animation systems is called a

ʻJ6ʼ connector. It deﬁnes a forty position insulation displacement (IDS) con-

nector and forty wire ribbon cable. In this case, the Kp-300 needs only

twenty-four of the thirty-two outputs in a J6 cable. That is why the Kp-300

connector is a thirty wire ʻ1/3 J6ʼ, The remaining eight outputs on the J6 ca-

ble can be used for any other purposes:

!Wire #!Color! Bit #! Description

! 1! Brown! ! Ground

! 2! Red! Bit 7! Show Start Button #8 LED Input To Kp-300

! 3! Orange!Bit 6! Show Start Button #7 LED Input To Kp-300

! 4! Yellow! Bit 5! Show Start Button #6 LED Input To Kp-300

! 5! Green! Bit 4! Show Start Button #5 LED Input To Kp-300

! 6! Blue! Bit 3! Show Start Button #4 LED Input To Kp-300

! 7! Violet! Bit 2! Show Start Button #3 LED Input To Kp-300

! 8! Gray! Bit 1! Show Start Button #2 LED Input To Kp-300

! 9! White! Bit 0! Show Start Button #1 LED Input To Kp-300

!10! Black! ! + 24 Vdc Supply

!11! Brown! ! Ground

!12! Red! Bit 7! Show Start Button #8 Enable Input To Kp-300

!13! Orange!Bit 6! Show Start Button #7 Enable Input To Kp-300

!14! Yellow! Bit 5! Show Start Button #6 Enable Input To Kp-300

!15! Green! Bit 4! Show Start Button #5 Enable Input To Kp-300

!16! Blue! Bit 3! Show Start Button #4 Enable Input To Kp-300

!17! Violet! Bit 2! Show Start Button #3 Enable Input To Kp-300

!18! Gray! Bit 1! Show Start Button #2 Enable Input To Kp-300

!19! White! Bit 0! Show Start Button #1 Enable Input To Kp-300

!20! Black! ! + 24 Vdc Supply

!21! Brown! ! Ground

!22! Red! Bit 7! Show Cycle Counter Input To Kp-300

!23! Orange!Bit 6! Blocking Valve Input To Kp-300

!24! Yellow! Bit 5! Bypass Buss #1 Input To Kp-300

!25! Green! Bit 4! Bypass Buss #2 Input To Kp-300

!26! Blue! Bit 3! E-Stop Show Running Input To Kp-300

!27! Violet! Bit 2! Remote HPU Start Input To Kp-300

!28! Gray! Bit 1! Remote HPU Stop Input To Kp-300

!29! White! Bit 0! Show Pause Reset Input To Kp-300

!30! Black! ! + 24 Vdc Supply

Gilderﬂuke & Co.• 205 South Flower Street • Burbank, California 91502 • 818/840-9484 • 800/776-5972 • fax 818/840-9485

Kp-300 Manual / September 4, 2012 4:29 PM / page 54 of 75