Owner manual

Gilderfluke & Co.• 205 South Flower Street • Burbank, California 91502 • 818/840-9484 • 800/776-5972 • fax [phone]
Kp-300 Manual / September 4, 2012 4:29 PM / page 6 of 75
A note about this manual:
This manual covers the specifics of the Kp-300. To pro-
gram the Kp-300 you will also want to refer to the
PC•MACs manual sections that cover the PC•MACs
software.
The Kp-300 is typically programmed in ‘Software-only’
or ‘Hardwareless RealTime’ mode. If you are using the USB-
DMX-512 for programming your Kp-300 through the DMX-
512 inputs, please refer to the PC•MACs ‘Unlimited’ mode.
The full PC•MACs manual can be downloaded from our
web site at:
http://www.gilderfluke.com