Owner manual

KP-300 Expansion • Gilderfluke & Company, Burbank, California
Relay Outputs
1/4 J6 Outputs
Inputs
J6 Inputs
3.0 3.1 3.2 3.3 3.4 3.5 3.6 3.7
2.0 2.1 2.2 2.3 2.4 2.5 2.6 2.7
1.0 1.1 1.2 1.3 1.4 1.5 1.6 1.7
0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7
2019181716151413121110987654321
654321 6543210 7
Kp-300 Expansion
The Kp-300 Expansion is a 3.5” (2U), 19” rack mounted panel that can be used to
add additional inputs and outputs to those found on the standard Kp-300:
1) Eight medium current (¼ J6 pinout)
2) Six High current optoisolated outputs (Six 2 position screw terminals)
3) Sixteen uncommitted optoisolated inputs (two DB-25 females)
4) Thirty-two optoisolated inputs (one J6 male header)
5) Sixteen uncommitted Red indicator LEDs
6) Sixteen uncommitted Yellow indicator LEDs
Unlike the Kp-300, the Kp-300 Expansion must be factory configured for your appli-
cation. The Kp-300 Expansion has a large CPLD on it, so it is possible to configure it for
some very complex logic. It can be configured to control ramps and doors, provide the
logic for occupancy sensors and seat belts, or just about anything else you can think of.
1) Eight Medium Current Outputs
(10 POSITION ¼ J6 SHROUDED MALE HEADER)
These eight outputs can each sink 150 ma of current at 24 vdc, or a total of 1.1
amps on all eight outputs. Whatever you are controlling should be connected be-
tween the +24 vdc Supply Output on pin #10, and the output pin (#2 through #9).
!Wire #!Color! Bit #! Description
! 1! Brown! ! Ground
! 2! Red! Bit 7! Output #8 From Kp-300 Expansion
! 3! Orange!Bit 6! Output #7 From Kp-300 Expansion
! 4! Yellow! Bit 5! Output #6 From Kp-300 Expansion
! 5! Green! Bit 4! Output #5 From Kp-300 Expansion
! 6! Blue! Bit 3! Output #4 From Kp-300 Expansion
! 7! Violet! Bit 2! Output #3 From Kp-300 Expansion
! 8! Gray! Bit 1! Output #2 From Kp-300 Expansion
! 9! White! Bit 0! Output #1 From Kp-300 Expansion
!10! Black! ! + 24 Vdc Supply
Gilderfluke & Co.• 205 South Flower Street • Burbank, California 91502 • 818/840-9484 • 800/776-5972 • fax 818/840-9485
Kp-300 Manual / September 4, 2012 4:29 PM / page 69 of 75