User Manual

2) Track Specific - Only the one Brick Brain addressed by the command is affected by this type
of command. Each Brick Brain and Digital Audio Repeater card in the system must be config-
ured to respond to different TRACK NUMBER address in order for the system to operate proper-
ly.
EXAMPLE: A 'START TRACK#' command will start only the one Brick Brain or Audio
Repeater card addressed by the TRACK# in the command.
3) Cocked - You can set a flag on any number of different Brick Brains and Audio Repeater
cards in the system which, when set, will cause those cards to respond to commands of this
type. Once a cocked command is issued, the cocked flag on all the cards will be reset.
EXAMPLE: A 'START COCKED' command will start only those Brick Brains and Digital Audio
Repeaters which have had their 'COCKED' flags set by the COCK TRACK# command.
4) Group (Rack Smart Brick Brain only) - Any number of different Rack Smart Brick Brains and
Audio Repeater cards in the system can be set to respond to one of sixteen different ÔGroupsÕ.
Any of the group commands can access any number of cards simultaneously.
EXAMPLE: A 'START GROUP 5' command will start only those Brick Brains and Digital Audio
Repeaters which respond to group number 5.
GILDERFLUKE & C
O
.¥ 205 S. FLOWER ST.¥ BURBANK, CA 91502 ¥ 818/840-9484 ¥ 800/776-5972 ¥ FAX [phone]
29 of 134