User Manual
- Show and String Setup -
This screen is entered by using the MORE command from the main configuration screen. It is used to
set up the 63 possible shows which a Smart Brick System can control, as well as the strings which can be
sent at the start or en of any of the shows. Entering this screen will stop any show which is currently run-
ning, and keep any new shows from being started. It brings up a configuration screen that looks like this:
- MACs SMART BRICK BRAIN - rev 1.05 copyright 1991-1992 GILDERFLUKE & Co. DCM -
a) show- 01 | g) next show- 02
b) time code- SMPTE | h) immed.- no
c) brick start- 00000 | i) delay- yes
d) Brick end- 16382 |
e) start string- 0 | m) more...
f) end string- 0 | X) exit
_01_|_02_|_03_|_04_|_05_|_06_|_07_|_08_|_09_|_10_|_11_|_12_|
O) string 1 - 01 | 50 | 4C | 0D |(52)|(0D)| 00 | 00 | 00 | 00 | 00 | 00 |
P) string 2 - 52 | 4A | 0D |(52)|(0D)| 00 | 00 | 00 | 00 | 00 | 00 | 00 |
Q) string 3 - 01 | 3A |(0A)| 00 | 00 | 00 | 00 | 00 | 00 | 00 | 00 | 00 |
R) string 4 - 4F |(0A)| 00 | 00 | 00 | 00 | 00 | 00 | 00 | 00 | 00 | 00 |
S) string 5 - 00 | 00 | 00 | 00 | 00 | 00 | 00 | 00 | 00 | 00 | 00 | 00 |
T) string 6 - 00 | 00 | 00 | 00 | 00 | 00 | 00 | 00 | 00 | 00 | 00 | 00 |
U) string 7 - 00 | 00 | 00 | 00 | 00 | 00 | 00 | 00 | 00 | 00 | 00 | 00 |
V) string 8 - 00 | 00 | 00 | 00 | 00 | 00 | 00 | 00 | 00 | 00 | 00 | 00 |
W) string 9 - 00 | 00 | 00 | 00 | 00 | 00 | 00 | 00 | 00 | 00 | 00 | 00 |
enter command-
The commands at the top of the screen (commands ÔaÕ through ÔiÕ) are used to set up the 63 possi-
ble individual shows. This part of the screen will show the details of the show number shown under the
ÔshowÕ command.
The lower part of the screen is used to configure the nine possible strings which can be sent at the
beginning or end of the different shows (commands ÔOÕ through ÔWÕ). The same nine strings are used for
all the shows. This part of the screen wonÕt change as you select different shows for configuration.
GILDERFLUKE & C
O
.¥ 205 S. FLOWER ST.¥ BURBANK, CA 91502 ¥ 818/840-9484 ¥ 800/776-5972 ¥ FAX 818/840-9485
49 of 134