Owner manual

Pb-DMX/32 Overview! 1
Pb-DMX/32 LEDs, Switches and Connections! 4
LEDs:# 4
Red ʻTestʼ button:# 4
RS-232 Serial Port:# 5
DMX-512 Input/Output:# 5
ʻAʼ & ʻBʼ Trigger Inputs:# 7
Power Supply:# 7
Relay Outputs:# 7
Shows Capacities for Pb-DMXs! 9
Configuration Menu! 12
DMX-512# 12
Exit Configuration# 13
Pb-DMX/32 Serial Port Commands! 14
Reset ʻJ5AA500ʼ# 14
Status ʻi00ʼ# 14
AutoDownload ʻsA5A500ʼ# 14
Echo mode ON ʻa00ʼ# 15
Echo mode OFF ʻbʼ# 15
Start One ʻt00ʼ# 15
Start Global ʻuʼ# 15
Stop One ʻx00ʼ# 15
Stop Global ʻyʼ# 15
Loop One ʻ!00ʼ# 15
Loop Global ʻ”ʼ# 15
Stop at End Track ʻ%00ʼ# 16
Stop at End Global ʻ&ʼ# 16
Select Show Track ʻ)00ʼ (show#)# 16
Select Show Global ʻ*ʼ (show#)# 16
Pause Show ʻ<00ʼ# 16
Continue Show ʻ>00ʼ# 16
Programming the Pb-DMX/32 with a Computer! 17
Install the Software........# 17
Getting started........# 17
Select the serial port........# 18
Starting a new show........# 18
Creating some figures........# 18
Creating some output channels........# 19
Name those channels........# 19
Saving your show........# 19
Editing your show........# 20
Moving channels to the OffLine Editing window........# 20
Where in the show are we?........# 20
Change the amount of show you see.........# 20
Which channel is which?........# 21
Rules to remember........# 21
Selecting one or more channels for modification........# 21
Changing the channels you selected........# 21
Another way to change the channels you selected........# 21
Gilderfluke & Co.• 205 South Flower Street • Burbank, California 91502 • 818/840-9484 • 800/776-5972 • fax [phone]
Pb-DMX/32 v1.+ Manual / 10/31/13