Owner's manual

Internal Clock: Valid frame rates for Internally clocked
shows are 1, 2, 4, 5, 8, 10, 12, 15, 16, 20, 24, 25,
30, 32, 50, 60, 75, and 100 frames per second.
Eternal Clock: Valid frame rates for externally
clocked shows are from one to one hundred
frames per second.
This entry will accept any value between 00 and 99.
00 is used to enter a one hundred frames per second
frame rate. If the entry isn’t valid for the time code you
are running, a ‘E5’ error will be displayed on the Heads
Up Display when an attempt is made to start the show.
“h” Early Starts:
The user has the choice of what each Smart Brick
Brain does when it is still playing this show and it receives
a new 'START' or 'LOOP' command. The options are:
a) "ignore any starts while running this show"
b) "store requested show(s) and start(s)"
c) "start this show over if no requests or 'next'"
d) "increment show number if no request or 'next'"
The JUMP FORWARD and JUMP BACKWARDS com-
mands have the lowest priority of all possible show re-
quests. Any serial port or 1/4 J6 Port show request will take
priority over these.
“t” Start String:
This command is used to select which string will be
sent at the start of a show. Although these strings are
generally used when you are running a LaserDisk (or
DVD) show, you can send them at the start of any type
of show if you so desire. They can also be used with seri-
ally controlled devices other than LaserDisk (or DVD)
players. If an entry of 0 is entered for the start string, no
string will be sent at the start of this show. Valid numbers
GILDERFLUKE & CO .• 205 SOUTH FLOWER STREET • BURBANK , CALIFORNIA 91502 • 818/840-9484 • 800/776-5972 • FAX [phone]
E
AST COAST /FLORIDA OFFICE • 7041 GRAND NATIONAL DRIVE • SUITE 128d • ORLANDO , FL. 32819 • 407/354-5954 • FAX [phone]
90 of 178