Owner's manual

menu.
2) Show Setup. This will ask you which of the 255 possi-
ble shows you want to modify.
3) String Setup. This allows you to modify the strings
used to control LaserDisk (or DVD)s.
4) Delay. This allows you to set how long each of the
sixteen possible countdown delays are.
5) Schedules. This is where you modify the ninety dif-
ferent possible schedules.
6) Calendar. This is where you select which schedule
will be used on any day.
“o” Load Defaults:
This command allows you to reload the default con-
figuration settings shown in the menu above.
“r” Download Configuration:
This command is used to store the current configura-
tion as a file on your computer. This file, once saved, can
be restored to any 2.00 (or later) Smart Brick Brain by sim-
ply sending it back to the Brain. If the serial address of
the saved file is different from the current address of the
Smart Brick Brain, then you should only load it from within
the Smart Brick Brain’s configuration mode. Otherwise,
the addresses will not match, and the Smart Brick Brain
will ignore the file. (Before you exit configuration mode
after doing an upload, check and correct the serial ad-
dress for this Smart Brick Brain on the ‘Main’ menu).
This command responds with the current contents of
the configuration EEprom for this Smart Brick Brain. This
string of 89,903 ASCII characters (65,315 for older Smart
Brick Brains) is led off by the character string 's5AA5'. As it
happens, this is the lead in string for the LOAD CONFIGU-
RATION command. This allows you to save the configu-
ration of one or more Smart Brick Brains (or other Smart
GILDERFLUKE & CO .• 205 SOUTH FLOWER STREET • BURBANK , CALIFORNIA 91502 • 818/840-9484 • 800/776-5972 • FAX [phone]
E
AST COAST /FLORIDA OFFICE • 7041 GRAND NATIONAL DRIVE • SUITE 128d • ORLANDO , FL. 32819 • 407/354-5954 • FAX [phone]
106 of 178