Owner's manual

d) Decrement on each hour the Smart Brick Brain is pow-
ered up. This is completely separate from the Real Time
Clock on the Smart Brick Brain, and is unaffected by
changing the time, or even completely removing the
RTC chip. To discourage resetting the Smart Brick Brain to
attempt to defeat the hour counter, each time the Smart
Brick Brain powers up, a hour is decremented. Because
this counter is time based, it will continue to tick away
even after another Lock Counter/Timer has expired.
e) Tampering. This counter will decrement on each show
start after the Smart Brick Brain senses that there has
been an attempt to change its configuration. The only
settings that is allowed to be changed are the time on
the RTC and the settings on this screen. Any other
change will trigger the tampering sensor. This is shown
by the word ‘tampering’ being printed in upper case let-
ters (‘TAMPERING’) on this screen. If the card is write pro-
tected, then the tampering sensor will not be triggered
by attempts to change the configuration. Once the
tampering sensor has been triggered, it can only be
stopped by clearing the counter or changing the set-
tings for the counter from this screen. Because the tam-
pering counter decrements on each show start, you can
set it to expire on the first show that plays (by setting the
counter to zero), or after some number of shows. This can
be used to really mess with the mind of the potential
tamperer.
f) Lock Configuration. This is a counter that doesn't actu-
ally decrement. If it is set, then a password will be re-
quired to enter configuration mode, even if no Lock
Counter/Timers have expired. This keeps unauthorized
users from tampering with the Smart Brick Brain configu-
ration.
GILDERFLUKE & CO .• 205 SOUTH FLOWER STREET • BURBANK , CALIFORNIA 91502 • 818/840-9484 • 800/776-5972 • FAX [phone]
E
AST COAST /FLORIDA OFFICE • 7041 GRAND NATIONAL DRIVE • SUITE 128d • ORLANDO , FL. 32819 • 407/354-5954 • FAX [phone]
137 of 178