Owner's manual

the Smart Bricks won’t turn on is that you haven’t enabled
them in the Smart Brick Brain.
Time Code Error: This LED will flash whenever the Smart Brick
Brain is correcting an error in the incoming time code. If it
flashes too often, then there is a problem with the con-
nection to the Smpte source, or the level of the Smpte
getting to the Smart Brick Brain is either too high or too
low. Occasional errors in Smpte time code aren’t all that
unusual, so don’t be alarmed it this LED flashes occa-
sionally. This indicates that the Smart Brick Brain is doing
it’s job, and has detected and corrected an error.
Generally these errors represent a glitch in the time code
as it is recorded on the tape (or whatever medium is
being used as the source for the Smpte time code), and
so will occur at the exact same instant in the show every
time it is played.
GILDERFLUKE & CO .• 205 SOUTH FLOWER STREET • BURBANK , CALIFORNIA 91502 • 818/840-9484 • 800/776-5972 • FAX [phone]
E
AST COAST /FLORIDA OFFICE • 7041 GRAND NATIONAL DRIVE • SUITE 128d • ORLANDO , FL. 32819 • 407/354-5954 • FAX [phone]
152 of 178