Owner's manual

ing commands which this input may trigger when you
activate it. (An example of this would be to have a com-
mand to wait for this input during a start string, and then
have this input also stop any show when it is triggered.
This would have the unfortunate effect of stopping the
show before it has even started. This command is not
available on Rack Smart Brick Brains when using
Panasonic LaserDisk Players.
Green:(04): When found in a string, this character causes
the Smart Brick Brain just to sit and wait until it gets an
input on the GREEN input. Be sure that there are no con-
flicting commands which this input may trigger when
you activate it. (An example of this would be to have a
command to wait for this input during a start string, and
then have this input also stop any show when it is trig-
gered. This would have the unfortunate effect of stop-
ping the show before it has even started.
Stop: (05): When found in a string, this character causes
the Smart Brick Brain to close the STOP relay output. It will
then reopen at a later time as set by the TAPE DECK
PULSE setting. When running a tape deck from the Smart
Brick System, this would normally be used to stop the
tape deck at the end of each show.
Play: (06): When found in a string, this character causes
the Smart Brick Brain to close the PLAY relay output. It will
then reopen at a later time as set by the TAPE DECK
PULSE setting. When running a tape deck from the Smart
Brick System, this would normally be used to start the
tape deck at the beginning of each show.
Rewind: (07): When found in a string, this character
causes the Smart Brick Brain to close the REWIND relay
output. It will then reopen at a later time as set by the
TAPE DECK PULSE setting. When running a tape deck
GILDERFLUKE & CO .• 205 SOUTH FLOWER STREET • BURBANK , CALIFORNIA 91502 • 818/840-9484 • 800/776-5972 • FAX [phone]
E
AST COAST /FLORIDA OFFICE • 7041 GRAND NATIONAL DRIVE • SUITE 128d • ORLANDO , FL. 32819 • 407/354-5954 • FAX [phone]
155 of 178