Owner's manual

ferent options which will take place at the end of this
show:
a) "wait”
b) "delay, then play 'next' show"
c) "jump immediately to 'next' show"
d) "play show 255/FF and start delay timer"
If set to ‘wait’, then nothing will happen at the end of
this show. The Smart Brick Brain will simply wait for the next
start or loop command.
If set to ‘Delay’ and currently ‘looping’ shows, the
Smart Brick Brain will check the delay switch on the front
of the Smart Brick Brain at the end of this show. If the time
delay selected is not a zero length (this is the default
length for delay ‘0’), and the switch position is not used to
select a schedule, the countdown timer will be started.
What happens at the end of this countdown is up to
what ever the Smart Brick Brain is configured to do at
countdown end (set on the ‘Main’ configuration screen).
If set to ‘Jump Immediately’ and currently ‘looping’
shows, or if the ‘Immediate Jumps’ setting on the ‘Main’
Screen is set to allow jumps on either ’looping’ or ‘playi-
ng’, the next show will be played immediately after this
show ends. The next show can be a specifically request-
ed ‘next show’, or a return from a specifically requested
show if ‘00’ is entered as the ‘next show’.
The ‘Jump Immediately’ setting can be used to build
up longer shows from a number of shorter segments.
You might want to do this if you are fixing a error in the
show burnt onto a LaserDisk (or DVD) (skipping over a
slow part of the show, for example), or to build up a show
which runs continuously between the main shows, but
has a number of ‘seams’ where it can branch to another
show if one is specifically requested. You can program
GILDERFLUKE & CO .• 205 SOUTH FLOWER STREET • BURBANK , CALIFORNIA 91502 • 818/840-9484 • 800/776-5972 • FAX [phone]
E
AST COAST /FLORIDA OFFICE • 7041 GRAND NATIONAL DRIVE • SUITE 128d • ORLANDO , FL. 32819 • 407/354-5954 • FAX [phone]
87 of 178