Instruction Manual

5
Connector Details Diagram:
Serial Port:
0.25" Square Header, 0.100" Centers
Pin #
1,2,7
3
5
6
9
4,8,10
Note: Connector is arranged for ribbon cable connection to DB9 to touch
screen controller.
Function
Common
RS232 Data In (Rx)
RS232 Data Out (Tx)
Optional 5V Supply 1.1A Fused
Ground
No Contact
1
2
9
10
User Interface Port:
0.25" Square Header, 0.100" Centers
Pin
1
3
5
7
9
11
13
15
17
19
21
23
25
27
29
Pin
2
4
6
8
10
12
14
16
18
20
22
24
26
28
30
Function
Button 1
Button 2
Button 3
Button 4
Button 5
Button 6
Button 7
Button 8
Gnd
Ext Horn Out (-)
Button 9- or S (5 wire TS)
X2 (4 wire TS) or X (5 wire TS)
X1 (4 wire TS) or Y (5 wire TS)
Y2 (4 wire TS) or Y (5 wire TS)
Y1 (4 wire TS) or X (5 wire TS)
Function
Gnd, Button 1 Common
Gnd, Button 2 Common
Gnd, Button 3 Common
Gnd, Button 4 Common
Gnd, Button 5 Common
Gnd, Button 6 Common
Gnd, Button 7 Common
Gnd, Button 8 Common
VCCF (+5V Fused 1.1A)
VCCF
VCCF, Button 9+ or H (5 wire TS)
L (5 wire TS)
No Contact
No Contact
No Contact
1
2
29
30
DC Power Input:
2.1mm Center +
Ethernet Port:
Standard 10BaseT RJ-45
Video Outputs:
Standard Composite RCA, S-Video Mini-DIN 4
Notes:
1. X1,X2,Y1,Y2 are connections for 4-wire resistive touchscreen.
2. Tie 23 to 29 and 25 to 27 as noted above for 5 wire resistive touch screen.
3. External Horn is open drain to gnd, 50mA max.
4. All Button x pins are paired so that a simple switch closure across
the pins, ie (Pin 1 to Pin 2 for Button 1) will activate that input.
Stereo Audio Output:
3.5mm Stereo Plug
Tip: Left
Ring: Right
Sleeve: Ground
Sleeve Ring Tip
View into port
View into port