Spec Sheet

Gillette Generators, Inc. •
••
• 2921 Thorne Dr. •Elkhart, IN • 46514 • Ph: 574-264-9639 • Fax: [phone] • Web: www.gillettegenerators.com • spc4-190130
4
CONTROL PANEL:
Deep Sea 7420 digital microprocessor with
logic allows programming in the field. Controller has:
• STOP-MANUAL-AUTO modes and automatic engine
shutdowns, signaled by full text LCD indicators:
• Low oil pressure  Engine fail to start
• High engine temp  Engine over speed
 Low Radiator Level  Engine under speed
 Three auxiliary alarms  Over & under voltage
 Battery fail alarm
Also included is tamper-proof engine hour meter
ENGINE:
Fuel filter • Full flow Oil filter • Air filter • Fuel pump •
Oil pump • Solenoid type starter motor • Hi-temp radiator •
Jacket water pump • Thermostat • Pusher fan and guard •
Exhaust manifold • Electronic Governor • 24 VDC battery
charging alternator • Flexible fuel and exhaust connectors •
Vibration isolators • Open coolant recovery system with
50/50 water to anti-freeze mixture • flexible oil & radiator
hose • Shut-down sensors for low oil pressure, high coolant
temp., low coolant level, high ambient temp.
AC GENERATOR SYSTEM:
AC generator • Shunt excited • Brushless design • Circuit
Breaker installed and wired to gen-set • Direct connection
to engine with flex disc • Class H, 180°C insulation • Self
ventilated • Drip proof construction • UL Certified
VOLTAGE REGULATOR:
1% Voltage regulation • EMI filter • Under-speed
protection • Over-excitation protection • total encapsulation
DC ELECTRICAL SYSTEM:
Battery trays • Battery cables • Battery hold down straps
 3-stage battery charger with float, absorption, & bulk
automatic charge stages
WEATHER / SOUNDPROOF ALUMINUM HOUSING:
Corrosion Resistant Protection consisting of:
• (9) Heated and Agitated Wash Stages
• Zinc Phosphate Etching-Coating Stage
• Final Baked on Enamel Powder Coat
• 18/8 Stainless Steel Hardware
STANDARD FEATURES FOR MODEL T4D-3000-60 HZ
STANDARD FEATURES
Design & specifications subject to
change without prior notice.
Dimensions shown are approximate.
Contact Gillette for certified drawings.
DO NOT USE DIMENSIONS FOR
INSTALLATION PURPOSES.