Installation Instructions

(800) 348
-
0746
www.gilpininc.com
[e-mail]
3
©Gilpin Products LLC
201
8
Gate Installation

When installing gate posts, opening should be width
of gate ordered. Gate will be approximately one inch
(1”) less than ordered size to accommodate hinges
and latch; e.g. Width plan for 36” opening for 36”
gate; gate will be 35”wide.

Determine swing of gate. Hinges should be mounted on inside of swing.

Mount hinges to gate (Instructions included in package).
o
Attach top and bottom hinges 3 inches from top and bottom of Gate Frame. Use self-drilling screws (included).
o
Barrel of hinge should be exposed. (This permits gate full swing.)
o
Remaining hinge(s) should be spaced evenly between top and bottom hinges.
o
Hinges must be installed in line with gate frame.
o
Elite hinges are mounted differently than Standard hinges as shown.

Attach gate to post or wall
using included self- drilling
screws, attach top hinge
first then bottom.
Install latch.
Instructions
included
in package
Mount Hinges
3”
Optional
hinge(s)
3
”
Wall
Gate
Wall
Gate