Operation Manual

7
Use only compatible memory cards approved by Our company for use with this device.
Incompatible memory cards may damage the card or the device and corrupt the data
stored in the card.
To insert the memory card:
1. Power off the mobile phone, and then remove the rear cover.
2. Insert the memory card into the slot at the bottom.
3. Finally replace the rear cover of the mobile phone.
Charger
1. Connect the charger to the charger jack on the phone.
2. Next connect the charger to a power socket, the charging starts, with the charging icon
in an animated state.
3. When the charging icon becomes static, it indicates that the battery is full.
4. Disconnect the charger from the power socket and the phone.
Note: Slight heating during charging is normal. It indicates that the battery is full, when the
charging icon becomes static.
4. Getting started
4
4
.
.
1
1
T
T
u
u
r
r
n
n
o
o
n
n
/
/
o
o
f
f
f
f
y
y
o
o
u
u
r
r
p
p
h
h
o
o
n
n
e
e
 Turn on the phone
Long press the power key to start up the cell phone. If you have started up the SIM card
1/2 lock, you have to enter SIM card 1/2 PIN.
 Turn off the phone
Long press the power key, a context menu will prompt, touch “Power off” to switch off the
cell phone.
 To wake up the phone
If you don’t use the phone for a while, the Home screen or other screen you are
viewing is replaced with the lock screen and then the screen darkens, to conserve the
battery.
1. Press the Power button.
2. Drag the lock icon rightward. The last screen you were working on opens.