Product Diagram

AUDIO SETTINGS

• The mute button has no function when a device is not connected to the 3.5mm Audio Jack.

• When an audio device is connected, pressing the Mute button once will mute the connected microphone and the Mute LED will turn red.

• Press the Mute button again to disable the Mute function. The Mute LED will turn o.

• If the Controller is in mute mode when a device is disconnected, mute mode will be disabled, and the Mute LED will be o.

• Press - and + buttons to adjust the device volume.

THUMBSTICK REPLACEMENT

1. Remove by pulling each thumbstick up. Do not twist.

2. Replace by lowering the thumbstick back until a magnetic “click” is heard.

NOTE: If you do not feel a magnetic click when replacing

a thumbstick, check for dust/debris that may have

collected and clear if necessary.

NOTE: The 3.5mm Audio Jack is supported in wired mode only. The controller must be connected to the Switch via the USB cable

for audio features to work.

NOTE: Headphones must be connected to the 3.5mm audio jack to adjust the volume.