Operation Manual

16
Temperature/Humidity
The radio weather station can show the
following information for each assigned
radio sensor:
• Current, minimum and maximum
measured values for temperature and
relative humidity (in percent).
• Comfort zone (WET, COM, DRY) and
trend symbols (rising, falling, steady).
Displaying temperature and humidity of the radio sensors
The individual radio sensors can be selected manually to have them
display, for example, the outside temperature:
1. Press Mode until ▼ is found in the temperature/humidity area.
2. Choose between the inside display and the radio sensors
(channels 1 through 5) with Ch.
✓ The house symbol indicates the inside display
or the channel number of the selected radio sensor .
Starting automatic polling of radio sensors
The radio sensors can be polled automatically. The data of each
radio sensor is displayed for 3 seconds.
Automatic polling is started as follows:
1. Press Mode until ▼ is found in the temperature/humidity area.
2. Press and hold Ch for 5 seconds.
✓ The data of the radio sensors are displayed one after another.
Ending automatic polling
To end automatic polling:
1. Press Mode until ▼ is found in the temperature/humidity area.
2. Press Ch briefly.
%RH
COM