Operation Manual

4
2. Guide the audio connection cable into
the flush-mounted panel box.
3. Insert the audio connection cable into a
system connector of the call push button
insert.
4. Install the call push button insert.
5. Set the bottom section of the TX_44
cover frame in place and attach the cen-
tral inserts to the flush-mounted inserts.
6. Clip on the frame top section and press
in the Torx screws.
Start-up
Once you have installed all of the devices
(outdoor and home stations, control unit
etc.), you can start up the door communica-
tion system.
Start-up is described in the system manual
included with the control unit.