Operation Manual

8
Installing front panel
1. Insert the locking plate flushly into the panel box.
Push the locking plate inwards until the plastic
brackets touch the wall.
2. Fasten the locking plate with the 4 Allen bolts and
locking washers included.
In order to guarantee a secure fastening of the front
panel later, the Allen bolts must be firmly tightened.
3. Fold out both lateral mounting retainers (1.), slide
the front panel of the Door Station Stainless Steel
into the mounting retainers (2.) and attach the catch
strap of the front panel to the hook of the locking
plate (3.).
4. Connect the 2-wire bus to the Bus terminals.
i
Insert locking plate evenly
The locking plate must not be twisted while being
inserted into the panel box and must not be under
tension.
2.
1.
3.
ZV BUS
i
Switch call button illumination off
To permanently switch the call button illumination
off, remove the jumpers between BUS and ZV.