Operation Manual

8
Installing panel box
1. Select a suitable installation site and chisel an open-
ing in the wall.
2. If necessary, mount the included wall anchor.
Note the following information when mounting the
panel box:
• Ensure installation position is correct. (Note the "TOP"
labelling).
• The panel box must be installed level. With the later
mounting of the Door Station Stainless Steel there is
no possibility for correction.
• The panel box must be installed as flush to the surface
as possible!
It must be ensured that the locking plate can be flush-
mounted later. Maximum plaster compensation is
20 mm.
3. Plaster in the panel box to be flush with the final sur-
face (maximum plaster compensation 20 mm).
Attention
Installation and mounting of electrical devices may
only be carried out by a qualified electrician.
max.
20 mm