eae Read all safety warnings, instructions, illustrations and specifications provided with this power tool. Failure to follow all instructions cited Below may result in electric shook, fire and for serous Injury. Save all wakings and instructions for future reference, The Tenn “popover-tool” in the wakings reforms fo your main-oporated (corded) power fool or tatter-operated (cordless) power look, = Keep work area clean indwell fit, Cloistered of deity areas if vile accidents.
= Ruminative any adjusting key or wrench therefor turning the power tool an. Wrench of a hey left all ached to a slating part of Be power tool may result in personal injury: = fn not overreach. Keep proper footing and balance at all times. This enables heater control of the powering in unexpected situations. « Dress properly. Do not wear loose clothing or jewelry. Neap your hale and doting away groin moving parts. Loews dotes, tensity or iin Bali Sar Be alight in Nonliving pats.
Recharge only with the charger specified by the manufacturer. A charger that is suitable for ofe type of ballet pack may cir sate & rik of fire when used with another bgt pack, sss power tools only ‘with specifically designated battery pats. Use of any other battery packs may Create a disk of injury ard fire.
Before using the tool, follow theses pets to charge the battery pack, 1. Plug the charger ino a HIP-volLAC power soiree. The charge indicator Hashes green. 2.After inserting: the ballet pack, ff the battery powers less than 80%. the red light is ‘always on; when the battery power beetles: BO%, the light Is red and green. J.When the chaining indicator ims green, hie-charging cycle-ends: 4.
Intercommunicating Clan avid alibis the nose of the 160! altar chivy use Moe i {B00 rivets) or #ihe toot becomes contaminated with piece dust and debris, t Re nova battery paid Nose 2 Ra move the nose housing rom the tool and he nose housing — place from he housing, Seuss the pusher ube, remove the guide with laws) 4 ean all pieces wile & dry cloth and inspect for damage. Guide" Halve a small amount of intimidating of lo the resplendence reassemble. Ensure the jaws are properly seated in the guide.
Solutions for stuck 1.Set the Conversing Switch to the right and press the Trigger for § seconds to release the rivet. 2. stack persists, please follow the steps below to remove the rivet, (L Remove the nose housing frown the tool. [Depression the pusher tube, remove the guide and jaws, the stuck rivet will be released automatically, Emailisuppori@girapow.
