Use and Care Manual

43
48
33
Pad Installation

Installation：
Dovetail the stop spanner（48）to fix the shaft（33）, and turn it in counter clockwise
direction to loose the pad（43）.
 Replace：
Dovetail the stop spanner （ 48 ） to fix the shaft, and turn it in counter clockwise
direction to loose the pad
（
43
）
.
Operation Manual
Check the following items prior to operation.
 Working Environment
Make sure that the work site is in order prior to polishing operations.
 Air Supply Quality
Select and install a compressor with sufficient capacity for the recommended air
consumption. Use of compressed air with water and oil may cause rusting and
other problems. Before operating the compressor, drain out the water and oil
completely through the drain port provided at the bottom of the compressor tank .
 The Operating Air Pressure
This sander is designed for operation in the optimum air pressure at 90 PSI/6 BARS
（
Max. air pressure at 8.0 kgf/cm²
）
. Excessive air pressure levels can cause the