User's Manual

Table Of Contents
PillCam Capsule Endoscopy
92 Managing RAPID Video Data
Batch Video Creation
RAPID can perform multiple video creations for any combination of up to four PillCam recorder cradles,
and for any number of raw data files. Once the process begins, the videos are created consecutively.
From PillCam Recorders
Place PillCam recorders into the connected cradles. In the Recorders screen, click Create Video for each
one, separately. The order in which you click Create Video determines the order in which the videos are
created. If you cancel one of the video creations after activating it, this PillCam recorder is skipped and the
next one starts automatically.
From Raw Data Files/USB Storage Devices
Connect USB Storage devices. In the Raw Data Files screen, click Create Video for each one of the
devices or any raw data files already on the computer. The order in which you click Create Video
determines the order in which the videos are created. If you cancel one of the video creations after
activating it, this raw data file is skipped and the next one starts automatically.
Pause/End Video Creation
During video creation, the End video creation button becomes available.
To cancel video creation:
1. Click End video creation.
2. Click Yes to end the compilation, or click No to continue compilation.
Managing RAPID Video Data
You can copy the video data from the PillCam recorder to the computer, a USB storage device, or a DVD
without compilation into a video. Video data management is disabled by default.
To enable video data management:
1. From the Home screen, select Tools > Settings.
2. Select the Video tab.