User's Manual
Table Of Contents
- User Manual
- RAPID® v8.3
- Table of Contents
- Chapter 1
- Using This Guide
- Chapter 2
- Indications, Contraindications, Warnings, Cautions
- Chapter 3
- Welcome to PillCam Capsule Endoscopy
- Chapter 4
- Preparing for PillCam Capsule Endoscopy
- Preparing the Patient
- Preparing the Required Equipment
- Creating Patient Instructions for the Procedure
- General Patient Guidelines During the Procedure
- Performing Patient Check-in
- Fitting Equipment on the Patient
- Chapter 5
- Know Your PillCam Recorder
- Chapter 6
- Performing PillCam Capsule Endoscopy
- Chapter 7
- Creating RAPID Videos
- Chapter 8
- Reviewing and Interpreting RAPID Videos
- Loading a Study with the Study Manager
- Using the Study Manager
- Overview of the RAPID Interface
- Using RAPID to View a Video
- RAPID Video Files
- Working with Findings
- Creating a PillCam Capsule Endoscopy Report
- RAPID Atlas
- Lewis Score
- Generating a Report
- Appendix A1
- Installing RAPID Software
- Appendix A2
- Configuring RAPID Software
- Appendix A3
- PillCam Equipment Maintenance
- Appendix A4
- Troubleshooting
- Appendix A5
- Technical Description
- System Labeling
- Essential Performance
- Warnings
- Cautions
- System Specifications
- PillCam SB 2 Capsule
- PillCam SB 3 Capsule
- PillCam UGI Capsule
- PillCam COLON 2 Capsule
- Sensor Array PillCam Recorder DR2
- Sensor Array PillCam Recorder DR3
- PillCam Recorder DR2/DR2C
- Cradle PillCam Recorder DR2
- PillCam Recorder DR3
- PillCam Recorder DR3 SDHC Memory Card
- Cradle PillCam Recorder DR3
- DC Power Supply
- RAPID for PillCam Software
- Guidance and Manufacturer's Declarations
- Index
Creating RAPID Videos
Managing RAPID Video Data 93
3. Under Video Data Management, Disable video data management is selected by default. Select
either Copy raw data or Compile raw data.
You can copy the video data from the USB storage device or a DVD onto a workstation for video
creation (see From Raw Data Files/USB Storage Devices on page 92).
Copying Data from a PillCam Recorder
To copy video data from a PillCam recorder:
1. Place the PillCam recorder in the cradle. Make sure that the cradle is connected to the personal
Computer (PC).
2. From the Home screen, click Recorder Download.
The Procedures screen appears with the Recorders tab on top.
3. Click the Recorder bar that corresponds to the PillCam recorder with the desired data:
• When the correct
Recorder bar is activated and you click on the Identify Recorder button, the
corresponding PillCam recorder’s LEDs blink.
• The relevant patient information is displayed on the Recorder bar.
• PillCam recorder's last use is displayed.
The Manage Video Data, Create Video, and Check-in Patient buttons become available.