User's Manual

PillCam Capsule Endoscopy
94 Managing RAPID Video Data
4. Click Manage Video Data.
5. Select the location for the copied data.
Click Change if you wish to copy the data to a different location (on the computer, network, or
external device) than the default (E:\datatransfer). To change the default directory, see Video Data
Management Section on page 174.
6. Click Start Copy.
During raw data copy the Recorder bar displays:
• The Compiling raw data or Copying data message, depending on the video settings.
• The status and progress bar.
• The patient name ID.
• The name of the video to be created.
• The battery status.
• The
Do not remove recorder message flashes below the battery status until all data is copied.
Once the process is complete, a message appears on the screen notifying you that the data copy is complete.
The PillCam recorder may be disconnected at this point.