User's Manual

PillCam Capsule Endoscopy
110 Using the Study Manager
Saving a Study to Another Archive
The Study Manager allows you to save a study to another archive, such as a USB storage device. When
you connect a USB storage device to one of the USB ports of the computer, the Study Manager treats it as
an archive and the icon appears on the left side of the screen.
1. Select the relevant study and click Export.
The Export Study screen appears.
2. Select either Entire study or Specific files under Select data to export. If you select Specific files, a
window opens inside the screen showing the files you can select.
3. If you wish to de-identify the video in the study, select the check box De-identify at the bottom of the
screen. Any reports created for this study also will be included in this export so make sure that
sensitive data is already de-identified if needed (see Report Ribbon on page 147).
4. Click Next.
5. Select Another archive under Select destination and click Next.
6. Click the relevant USB icon and click OK.
7. A screen appears showing the progress bar and Exporting study.
8. When the progress bar is full, the last screen appears with the message File export successful.
Click OK.
֠
֠֠
֠
Note
USB storage devices used for Raw Data Copy or for transport of RAPID
videos should be labeled as such, stating that it may contain clinical data
and should not be used for other purposes.