User's Manual

Reviewing and Interpreting RAPID Videos
Creating a PillCam Capsule Endoscopy Report 147
Report Ribbon
The Report ribbon is divided into several groups enabling many different functions. The buttons and
commands are organized in the following logical groups:
• Configure
• Report
• Image Data
• Markings
• Clinical Tools
In this chapter the groups will be explained in a different sequence than how it appears in the software in
order to closely match the proper workflow that is used when interpreting the data.
Configure Buttons Group
The Configure group enables the selection of templates for report generation, the ability to de-identify
patient information, to select/deselect all thumbnails, and view an enlarged view of captured
thumbnails.
Template Selection for Report
The template drop-down list shows 4 templates that can be selected before generating a report. The 4
templates to be shown in the drop-down list can be configured from a pre-loaded library of 12 report
templates of different variations. The templates differ from each other in the inclusion or exclusion of
the Localization track, the SB Progress Indicator associated with each thumbnail and the size of
thumbnails displayed in the final report. It is at the discretion of the user to configure which templates
to use in the workflow. Only 4 of the 12 reports will be shown in the drop-down list in the Report
ribbon. The selected report template will be used for each particular case. To configure the templates,
see Report Templates Section on page 177.
֠
֠֠
֠
Note
Upgrading the RAPID software from v7 to v8.3 will replace all templates and
their configuration.
Configure group Report group Image Data
group
Marking
group
Clinical Tools
group
Template will
appear on
Report ribbon