User's Manual

PillCam Capsule Endoscopy
172 RAPID Settings
3. If more than one physician uses this installation of RAPID, select Clear physician name when new
video opens. If selected, you can manually enter the physician name for each video when needed.
4. In Facility details, type in the facility information (for example, address and telephone number).
5. To add your facility’s logo to reports, click Change Logo.
a. Navigate to the logo file (jpeg image) you previously saved on your computer and select the
file.
b. Click Open to set the file as the report logo.
c. To clear the selected logo and prevent any logo from appearing on the report, click Clear Logo.
6. Click Apply to accept the new settings or click Cancel to close the Settings screen without making
any changes. Clicking OK will accept the new settings and close the Settings screen.
Regional Settings Section
By default, the RAPID software is set to English and uses metric units of measure. You may change these
settings.
To change the language:
1. From the Home screen, select Tools > Settings. The Settings screen appears.
2. Under the General tab, in the Regional Settings section, open the Language list and select the
desired language.
3. Enable spell check is selected by default. Un-check to disable spell check.
4. Enable GI Dictionary is selected by default. Un-check to disable the GI Dictionary.
5. Open the Full name format list and select the desired name format.
6. Click Apply to accept the new settings or click Cancel to close the Settings screen without making
any changes. Clicking OK will accept the new settings and close the Settings screen.
To change the unit of measure:
1. From the Home screen, select Tools > Settings. The Settings screen appears.
2. Under the General tab, in the Regional Settings section, open the Measurement units list and select
the desired measurement system.
֠
֠֠
֠
Note
The Logo used in the report is copied to a RAPID directory. The original is
not affected.