User's Manual

PillCam Capsule Endoscopy
174 RAPID Settings
Video Creation Section
You can copy the video data from the PillCam recorder to the computer, a USB storage device, or a DVD
without compilation into a video.
To determine video creation method:
1. From the Home screen, select Tools > Settings.
2. Select the Video tab.
3. In Video Creation, under Creation method select either Create video directly from recorder or
First copy raw data, then create video.
4. You can change the following directories by typing the desired location or clicking Browse to select a
folder:
• Video directory: destination location for created videos
• Raw data directory: destination location for copying raw from the PillCam recorder
5. You can also enable the following feature with the video by selecting the check box Allow Manual
mode for procedures other than SB3 with DR3 (increases file size).
Video Data Management Section
To enable video data management:
1. From the Home screen, select Tools > Settings.
2. Select the Video tab.
3. Under Video Data Management, Disable video data management is selected by default.
4. Select:
• Copy raw data: copy data ONLY. This takes less time, so the PillCam recorder is freed up sooner.
The copied data can later be processed to create a video.
• Compile raw data: process for video creation.
5. Click OK to accept the new settings or click Cancel to close the Settings screen without making any
changes.
֠
֠֠
֠
Note
Select First copy raw data, then create video to quickly release the
PillCam recorder after the raw data is copied without waiting for full video
compilation.
You must manually clear raw data files because this video creation method
can rapidly fill up your hard drive.