User's Manual

Configuring RAPID Software
Additional Settings 195
Importing Reports
Reports generated by RAPID versions before RAPID 5 are not automatically displayed in the Study
Manager. If you wish to be able to see them in the Study Manager, you must import them by doing the
following:
To import reports:
1. Open the video of the relevant study.
2. Select File > Tools > Import RAPID 4 Reports.
The following message appears: Ensure that the selected reports belong to this study.
3. Click OK.
A Windows browser screen opens at the location of the currently open video, showing the reports
that are in this folder.
4. Select the report(s) you wish to import. If the report is not in this folder, browse to the correct
location and select the report.
5. Click Open. The Reports imported successfully message appears.
6. Click OK and repeat this procedure for all the studies performed before RAPID 5.
Freeing Space on Your Computer
Deleting Videos
If you start to create a video while there is not enough space on your computer, you will be prompted
to empty the Recycle Bin and if more space is needed, to delete RAPID folders.
To free space for new videos, delete RAPID studies from your hard disk or from E:\Videos.
To delete videos from your hard disk:
1. From the Home screen click Tools > Delete Videos.
֠
֠֠
֠
Note
It is recommended to back up the RAPID studies by saving them on
removable media discs (see Burning a Study to a CD/DVD on page 108).
You may then delete them from the computer’s hard disk at any time or
when prompted to do so by the RAPID software.
Failure to back up a RAPID video before deleting will cause the study to be
permanently lost.