User's Manual
Table Of Contents
- User Manual
- RAPID® v8.3
- Table of Contents
- Chapter 1
- Using This Guide
- Chapter 2
- Indications, Contraindications, Warnings, Cautions
- Chapter 3
- Welcome to PillCam Capsule Endoscopy
- Chapter 4
- Preparing for PillCam Capsule Endoscopy
- Preparing the Patient
- Preparing the Required Equipment
- Creating Patient Instructions for the Procedure
- General Patient Guidelines During the Procedure
- Performing Patient Check-in
- Fitting Equipment on the Patient
- Chapter 5
- Know Your PillCam Recorder
- Chapter 6
- Performing PillCam Capsule Endoscopy
- Chapter 7
- Creating RAPID Videos
- Chapter 8
- Reviewing and Interpreting RAPID Videos
- Loading a Study with the Study Manager
- Using the Study Manager
- Overview of the RAPID Interface
- Using RAPID to View a Video
- RAPID Video Files
- Working with Findings
- Creating a PillCam Capsule Endoscopy Report
- RAPID Atlas
- Lewis Score
- Generating a Report
- Appendix A1
- Installing RAPID Software
- Appendix A2
- Configuring RAPID Software
- Appendix A3
- PillCam Equipment Maintenance
- Appendix A4
- Troubleshooting
- Appendix A5
- Technical Description
- System Labeling
- Essential Performance
- Warnings
- Cautions
- System Specifications
- PillCam SB 2 Capsule
- PillCam SB 3 Capsule
- PillCam UGI Capsule
- PillCam COLON 2 Capsule
- Sensor Array PillCam Recorder DR2
- Sensor Array PillCam Recorder DR3
- PillCam Recorder DR2/DR2C
- Cradle PillCam Recorder DR2
- PillCam Recorder DR3
- PillCam Recorder DR3 SDHC Memory Card
- Cradle PillCam Recorder DR3
- DC Power Supply
- RAPID for PillCam Software
- Guidance and Manufacturer's Declarations
- Index
PillCam Capsule Endoscopy
32 PillCam Capsule Endoscopy System Components
PillCam Sensors
The PillCam sensors are physical receptors that receive transmission data from the PillCam capsule and
transfer it to the PillCam recorder. These sensors are placed on the patient as a sensor belt or a sensor
array:
• PillCam sensor belt: The sensor belt is worn around the patient’s waist over a thin shirt.
• PillCam sensor array: The sensors of the sensor array are attached to the patient's skin. The sensor
locations depend on the procedure type. Each sensor consists of a flexible printed circuit board (PCB)
and is attached with a disposable, medical adhesive sleeve.
The PillCam sensor array and belt are connected to the PillCam recorder by a flexible cable.
RAPID for PillCam Software
The RAPID for PillCam software (RAPID v8.3) supports the PillCam capsule endoscopy procedure by
providing access to the different steps in the PillCam capsule endoscopy procedure via the Home screen.
Home Screen
After starting the RAPID v8.3 software, the Home screen appears. The Home screen is the main screen
that provides access to all phases of the PillCam capsule endoscopy procedure.
The Home screen enables the following functions:
• Patient Check-in: Admitting the patient and initializing PillCam recorder.
• Recorder Download: Creating the RAPID video.
• View Study: Viewing videos and allowing interpretation as well as generating capsule endoscopy
report (see Reviewing and Interpreting RAPID Videos on page 97).
֠
֠֠
֠
Note
The PillCam Capsule Endoscopy System does not contain any natural
rubber latex components.