User's Manual

PillCam Capsule Endoscopy
44 Performing Patient Check-in
!
Caution
When placed in the cradle, RAPID 8.3 will perform updates to your existing
PillCam recorders. It is important to follow the instructions displayed on the
screen. Do not stop the update process until it is finished.
• For the PillCam recorder DR3, RAPID will perform a mandatory update.
• For the PillCam recorder DR2, follow the instructions detailed in the Note
below.
֠
֠֠
֠
Note
PillCam recorder DR2 only: If the PillCam recorder needs a software
update, this message appears: This recorder requires a software update.
Do you want to update the recorder software version?
We highly recommend you perform this upgrade unless you are an ESO 2
user. Upgrading the DR2 to SB 3 support will deactivate ESO 2 support. If you
are working with several recorders, designate which will support ESO 2
procedures and which will support SB 3 procedures.
• Click Yes and follow the instructions on the screen. When the update is
done, remove the PillCam recorder from its cradle and reinsert it.
• To ignore the update, click No. You may continue the check-in and perform
the update later.
• Selecting the Don’t show this message again checkbox will disable
further updates to this specific recorder. This option is available only if you
are logged in as the administrator.