User's Manual
Table Of Contents
- User Manual
- RAPID® v8.3
- Table of Contents
- Chapter 1
- Using This Guide
- Chapter 2
- Indications, Contraindications, Warnings, Cautions
- Chapter 3
- Welcome to PillCam Capsule Endoscopy
- Chapter 4
- Preparing for PillCam Capsule Endoscopy
- Preparing the Patient
- Preparing the Required Equipment
- Creating Patient Instructions for the Procedure
- General Patient Guidelines During the Procedure
- Performing Patient Check-in
- Fitting Equipment on the Patient
- Chapter 5
- Know Your PillCam Recorder
- Chapter 6
- Performing PillCam Capsule Endoscopy
- Chapter 7
- Creating RAPID Videos
- Chapter 8
- Reviewing and Interpreting RAPID Videos
- Loading a Study with the Study Manager
- Using the Study Manager
- Overview of the RAPID Interface
- Using RAPID to View a Video
- RAPID Video Files
- Working with Findings
- Creating a PillCam Capsule Endoscopy Report
- RAPID Atlas
- Lewis Score
- Generating a Report
- Appendix A1
- Installing RAPID Software
- Appendix A2
- Configuring RAPID Software
- Appendix A3
- PillCam Equipment Maintenance
- Appendix A4
- Troubleshooting
- Appendix A5
- Technical Description
- System Labeling
- Essential Performance
- Warnings
- Cautions
- System Specifications
- PillCam SB 2 Capsule
- PillCam SB 3 Capsule
- PillCam UGI Capsule
- PillCam COLON 2 Capsule
- Sensor Array PillCam Recorder DR2
- Sensor Array PillCam Recorder DR3
- PillCam Recorder DR2/DR2C
- Cradle PillCam Recorder DR2
- PillCam Recorder DR3
- PillCam Recorder DR3 SDHC Memory Card
- Cradle PillCam Recorder DR3
- DC Power Supply
- RAPID for PillCam Software
- Guidance and Manufacturer's Declarations
- Index
Know Your PillCam Recorder
PillCam Recorder DR2 75
Charging
The cradle provided with the PillCam recorder DR2:
• Charges the PillCam recorder when it is placed in the cradle
• Charges a spare battery externally when a stand-alone battery is placed in the cradle
• Performs battery maintenance by discharging the battery when needed (the cradle detects when the
battery needs refreshing and automatically discharges it before recharging)
To charge the PillCam recorder DR2:
1. Insert the PillCam recorder DR2 into the cradle.
2. Push it all the way down into the cradle and make sure you hear a series of beeps, indicating that
connection is complete.
.
There are four connections on the back panel of the cradle. Only two of them are used with standard
operation of the cradle: the power connector and the USB cable connection.
The cradle also connects the PillCam recorder to the Personal Computer (PC).
• The green LED on the cradle indicates that the PillCam recorder DR2 is fully charged and ready
for use.
• The red LED, when lit continuously, indicates a defective battery.
• The red LED, when blinking, indicates that there is a problem with the cradle.
PillCam Recorder DR2 LEDs
When the PillCam recorder DR2 is on, it starts recording as soon as it receives a signal from a PillCam
capsule. When the capsule LED blinks, the PillCam recorder DR2 is receiving data. When the signal
from the PillCam capsule is too weak, the LED does not blink.
!
Warning
Do not connect the PillCam recorder DR2 to the
sensor array while the PillCam recorder DR2 is in
its cradle.
Capsule LED
Recorder LED