User's Manual
Table Of Contents
- User Manual
- RAPID® v8.3
- Table of Contents
- Chapter 1
- Using This Guide
- Chapter 2
- Indications, Contraindications, Warnings, Cautions
- Chapter 3
- Welcome to PillCam Capsule Endoscopy
- Chapter 4
- Preparing for PillCam Capsule Endoscopy
- Preparing the Patient
- Preparing the Required Equipment
- Creating Patient Instructions for the Procedure
- General Patient Guidelines During the Procedure
- Performing Patient Check-in
- Fitting Equipment on the Patient
- Chapter 5
- Know Your PillCam Recorder
- Chapter 6
- Performing PillCam Capsule Endoscopy
- Chapter 7
- Creating RAPID Videos
- Chapter 8
- Reviewing and Interpreting RAPID Videos
- Loading a Study with the Study Manager
- Using the Study Manager
- Overview of the RAPID Interface
- Using RAPID to View a Video
- RAPID Video Files
- Working with Findings
- Creating a PillCam Capsule Endoscopy Report
- RAPID Atlas
- Lewis Score
- Generating a Report
- Appendix A1
- Installing RAPID Software
- Appendix A2
- Configuring RAPID Software
- Appendix A3
- PillCam Equipment Maintenance
- Appendix A4
- Troubleshooting
- Appendix A5
- Technical Description
- System Labeling
- Essential Performance
- Warnings
- Cautions
- System Specifications
- PillCam SB 2 Capsule
- PillCam SB 3 Capsule
- PillCam UGI Capsule
- PillCam COLON 2 Capsule
- Sensor Array PillCam Recorder DR2
- Sensor Array PillCam Recorder DR3
- PillCam Recorder DR2/DR2C
- Cradle PillCam Recorder DR2
- PillCam Recorder DR3
- PillCam Recorder DR3 SDHC Memory Card
- Cradle PillCam Recorder DR3
- DC Power Supply
- RAPID for PillCam Software
- Guidance and Manufacturer's Declarations
- Index
Performing PillCam Capsule Endoscopy
Real-Time Viewing with PillCam Recorder DR2 Only— External Mode 87
When in Real-Time viewing the PillCam recorder screen turns off and returns to the main screen after:
• 2 minutes of inactivity for colon visualization procedures/SB procedures,
• 30 minutes of inactivity for ESO/UGI procedures.
Real-Time Viewing with PillCam Recorder DR2 Only—
External Mode
To activate real-time viewing with external RAPID Real-Time viewer, connect either PillCam recorder
model you are using to the external real-time viewer through the respective USB cable and activate the
RAPID Real-Time viewer. For instructions on the operation of the RAPID Real-Time viewer, see the
user manual for RAPID Real-Time viewer.
Removing Equipment from the Patient
If the patient has not already removed equipment, do so as follows:
1. Disconnect the sensors from the PillCam recorder.
2. Remove the PillCam recorder from the patient.
3. Remove the sensors from the patient.
4. Remove the PillCam recorder from the pouch and place it in the cradle.
5. After each procedure, make sure to clean the equipment (see PillCam Sensor Cleaning on
page 205) and charge the PillCam recorder (see Charging on page 203).
֠
֠֠
֠
Note
AFR should be activated only after visually confirming entry into the small
bowel