User Manual

Appendix: Electrical Safety
LE
D Color
State
Action Recommended
Red
Charging
Continue charging until the LED turns green.
Yellow
A charging circuit fault has
occurred
Undock and then re-dock the data receiver in the
docking station. If the yellow light persists
contact technical support.
Green
Fully charged
The data receiver is ready for use.
Off
x Docking station is not
connected to an AC power
source
x Receiver is not fully connected
to the docking station
x Docking station or data
receiver are in thermal
shutdown
x Connect the docking station to a source of
AC power.
x Undock and then re-
dock the data receiver in
the docking station.
x Contact technical support for assistance.
Activation Fixture
The activation fixture turns the capsule on and off using strong magnets that interact
with the capsule’s internal power switch.
Warning
Individuals with pacemakers should not come within one (1) foot of the SmartPill activation fixture. The
fixture contains strong magnets that could interfere with pacemaker operation.
Warning
Do not store the SmartPill Activation Fixture in the same room with or a room adjacent to MRI equipment.
The fixture contains strong magnets and could become a dangerous projectile.
Caution
Keep the SmartPill Activation Fixture more than two (2) feet from magnetic media and computer monitors.
Caution
Do not store unused capsules within one (1) foot of the SmartPill Activation Fixture. Stray magnetic fields
from the activation fixture may activate the capsule.
System Computer and MotiliGI Software
MotiliGI software comes installed on the system computer. MotiliGI receives and
processes downloaded data from the data receiver, stores test data, provides data
analysis tools, and graphically displays test results. MotiliGI features algorithms that
calculate GET, SBTT, CTT, WGTT, and motility indices of the antrum and