User Manual

Appendix: Electrical Safety
x The data receiver’s display then indicates the capsule’s data:
Capsule Serial
number
SS = signal strength
P = pressure
The capsule’s data was received. / [
X] = The data was not
received.
x The icon appears in the lower-right corner of MotiliGI: .
► If the capsule did not activate, repeat the procedure.
4. Click Next >.
5. If you wish to deactivate the test, see Aborting a Test – Deactivating the Capsule,
Page 44.
Step 5: Select Capsule
All activated capsules (ingested or not yet ingested) within range of the data receiver
appear
1
. This process may take up to 1 minute.
1
The data receiver can detect the capsule in open air (not ingested) at distances of up to 40 feet.