User Manual

Appendix: Electrical Safety
Step 6: Enter Pressure Calibration Code
1. Locate the calibration code found on the lid of the capsule container. Enter the
code.
2. Click Next >.
Step 7: Add pH Calibration Buffer
Caution
Once exposed to buffer, the capsule must be ingested within 2 hours or discarded. Confirm that the patient is
available and prepared to proceed with the test before you begin Step 7.
1. Put gloves on and follow the prompts.
Caution
Wear gloves when handling the capsule. Do not touch the calibration buffer or capsule with your finger as
this could cause an electrostatic charge.