User Manual

Appendix: Electrical Safety
Guidelines:
Indication for Use
Return Data Receiver After
Measuring GET
24-48 hours
Measuring WGTT
2–5 days
4. Check the box I have completed the patient’s discharge.
5. Click Finish. The Patient Information screen appears.
6. Do any of the following:
x Enter notes regarding the patient’s capsule ingestion.
x Close MotiliGI.
x Use Live Monitoring mode to view live data while the patient is still in the
office.
Live Monitoring Mode (optional)
You may view live data from the capsule while the patient is still in the office.
Prerequisites:
x The test has begun.
x The docking station is connected to the system computer.
x The data receiver is in the docking station.
1. Click or select Action > Live Monitoring. The Live Monitoring control panels
appears on the right.
It may take several minutes for sufficient data to be captured before the MotiliGI
graph begins to show a noticeable progression of pressure, pH, and temperature data
values.
Caution
The patient must remain in close proximity of the docked data receiver during live monitoring. If the patient
moves away from the data receiver, test data may be permanently lost.
x You may remove the data receiver from the docking station at any time during
live monitoring without data loss if the data receiver is kept near the patient
during the transition from being docked to being worn by the patient. When
you remove the data receiver from the docking station, live monitoring stops.
x The MotiliGI software cannot save test data displayed during live monitoring,
but the data are stored on the data receiver and are downloaded as part of the
completed test.
2. To exit live monitoring, click Stop on the live monitoring control panel.